For what do you Use a Cisco Virtual SAN?
A. Virtual SAN is a way to divide a fabric logically.
B. Virtual SAN is a role-based access control mechanism
C. Virtual SAN is a way to group physical switches.
D. Cisco does not use a concept of a Virtual SAN.
Which command do you use to verify the FC devices that have logged into a Cisco Nexus switch?
A. flogi database show
B. show flogi database
C. show login database
D. login database show
The storage administrator has verified SAN fabric connectivity between the initiator and target other LUNs are visible. However, one LUN still is NOT visible to the initiator. What do you need to do to determine the cause?
A. verify the target HBA is enabled
B. verify the LUN is properly mapped to a correct igroup
C. verify the initiator HBA is enabled
D. verify the LUN has been configured to the appropriate OS type
Which storage system command should you use to group initiators to allow them to be mapped to logical unit numbers (LUNs)?
A. igroup create
B. igroup map
C. igroup allow
D. igroup group
A Windows 20O8 iSCSI initiator is NOT able to switch between different paths when a path becomes unavailable. What is a likely cause?
A. An iSCSI path must have jumbo frames enabled to allow Multipathing.
B. The iSCSI protocol does NOT allow switching between paths, although you can trunk oaths together.
C. An iSCSI igroup does NOT have the initiator's IQN.
D. The Multipath I/O function is NOT installed.
Which is NOT a reason to zone your fabric?
A. increase network security
B. reduce cross talk between ports
C. limit the type of initiators used
D. limit the available paths
To ensure path redundancy and load balancing you must configure each host for________.
A. SnapDrive for Unix
B. thin provisioning
C. consistent igroup usage
D. host multipathing specific to its OS type and version level
E. jumbo frames
The cluster administrator determines the cluster management LIF is down. What is another method to access the cluster?
A. Login via one of the FC LIFs.
B. Login via one of the data LIFs.
C. Login via one of the intercluster LIFs.
D. Login via one of the node management LIFs.
Which is NOT a prerequisite for serving data using the iSCSI protocol in Data ONTAP running in Cluster Mode?
A. The Vserver must have an iSCSI service configured and running.
B. The Vserver must have logical interfaces (LIFs) configured to serve data via the (SCSI protocol.
C. The node containing the data to be served via ISCSI must have an MA partner with a partner Interface configured.
D. The cluster must have an iSCSI license.
What is the name of the SAN replicated database ring in Data ONTAP Cluster-Mode 8.1 and later?
A. None of the above. The SAN protocol does not have a database replication ring.
B. LUN Configuration and Operation Manager daemon (LCOMd)
C. Block Configuration and Operation Manager daemon (BCOMd)
D. SAN Configuration and Operation Manager daemon (SCOMd)
E. FC Configuration and Operation Manager daemon (FCOMd)
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only NetApp exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your NS0-504 exam preparations and NetApp certification application, do not hesitate to visit our Vcedump.com to find your solutions here.