Exam Details

  • Exam Code
    :EW0-200
  • Exam Name
    :Extreme Networks Associate (ENA)
  • Certification
    :Extreme Networks Certifications
  • Vendor
    :Extreme Networks
  • Total Questions
    :245 Q&As
  • Last Updated
    :Jun 28, 2025

Extreme Networks Extreme Networks Certifications EW0-200 Questions & Answers

  • Question 191:

    Which CLI command would you use to configure proxy ARP for IP address 10.0.0.1/24 with MAC address

    00:11:22:33:44:55

    so that it will respond regardless of the VLAN?

    A.

    config iparp add proxy 00:11:22:33:44:55 10.0.0.1/24 always

    B.

    config iparp add proxy 10.0.0.1/24 00:11:22:33:44:55 always

    C.

    config proxyarp add 10.0.0.1/24 00:11:22:33:44:55 always

    D.

    config proxyarp add 00:11:22:33:44:55 10.0.0.1/24 always

  • Question 192:

    The IP ROUTING field indicates whether IP forwarding has been enabled or disabled when the CLI command: show ipconfig is entered.

    A. TRUE

    B. FALSE

  • Question 193:

    In an Extreme Switch, the routing function is disabled on all VLANs by default.

    A. TRUE

    B. FALSE

  • Question 194:

    The acronym TCP/IP stands for:

    A. Transport Control Protocol/Internal Protocol

    B. Transmission Control Protocol/ International Protocol

    C. Transfer Control Policy/Interactive Protocol

    D. None of these

  • Question 195:

    In a Summit 5i switch, a MAC address must be configured for each physical port before routing can be configured.

    A. TRUE

    B. FALSE

  • Question 196:

    Given the following diagram, how would you disable ports 3 through 8 on module 1 and all ports on modules 3 and 4?

    A. disable ports slot 1 ports 3-8, slot 3 ports 1-8, slot 4, ports 1-8

    B. unconfig ports 1:3-1:8, 3:1-4:8

    C. config vlan delete ports 1:3-1:8, 3:1-4:8

    D. disable ports 1:3-1:8, 3:1-4:8

  • Question 197:

    What information is not provided by the CLI command: show version?

    A. The ExtremeWare software image version and the build date and time

    B. The MAC address of the switch

    C. The Switch Serial Number

    D. The BootROM version

  • Question 198:

    You have been assigned the task of configuring an 8-port load share group between two switches that use the address-based algorithm. Which of the following commands will provide you with the desired result?

    A. Summit #1: enable sharing 1 grouping 1-8 algorithm address-basedSummit #2: enable sharing 8 grouping 1-8 algorithm address-based

    B. Summit #1: enable sharing 1 grouping 1-8 algorithm address-basedSummit #2: enable sharing 1 grouping 1-8 algorithm address-based

    C. Summit #1: enable sharing 1 grouping 1-8 address-based algorithmSummit #2: enable sharing 1 grouping 1-8 address-based algorithm

    D. None of the above.

  • Question 199:

    The CLI console port utilizes a serial cable for physical switch to terminal connection.

    A. TRUE

    B. FALSE

  • Question 200:

    Which CLI command will you use to change the CLI prompt from the default display to Switch02?

    A. CONFIG SNMP SYSLOCATION Switch02

    B. CONFIG SNMP SYSNAME Switch02

    C. CONFIG CLI PROMPT Switch02

    D. CONFIG CLI DISPLAY Switch02

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Extreme Networks exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your EW0-200 exam preparations and Extreme Networks certification application, do not hesitate to visit our Vcedump.com to find your solutions here.