EMC Platform Engineer E20-690 Questions & Answers

• Question 111:

  Where can customers obtain all documents related to the installation and maintenance of their VNX?

  A. https://mydocs.emc.com/VNX

  B. https://support.emc.com/VNX

  C. https://one.emc.com/VNX

  D. http://powerlink.com/VNX

  Correct Answer: A

• Question 112:

  You are sent to a secure customer site to install a VNX, where the use of cell phones and mobile hot spots is prohibited. When you arrive you find that your VNX Installation procedure file is corrupted.

  Using one of the customer's workstations where can a copy of the VNX installation procedure be found?

  A. mydocs.emc.com/VNX

  B. support.emc.com/VNX

  C. emc.com/engineering/VNX

  D. powerlink.emc.com/VNX

  Correct Answer: A

• Question 113:

  Which utility discovers and initializes a VNX, performs a health check, configures the control station and Data Movers, and allows for product registration?

  A. VNX Installation Assistant

  B. Unisphere Service Manager

  C. Unisphere Initialization Utility

  D. VNX Installation Toolbox

  Correct Answer: A

• Question 114:

  In a VNX for File system, what is connected to the Control Station Eth1 port?

  A. Secondary Control Station

  B. Primary DM MGMT network

  C. Secondary DM MGMT network

  D. Customer Network for MGMT

  Correct Answer: A

• Question 115:

  Refer to the exhibit.

  

  In an original balanced cabling configuration of a VNX5400, what is the enclosure number to which the large arrow at the top of the diagram is pointing?

  A. 1

  B. 0

  C. 2

  D. 3

  Correct Answer: A

• Question 116:

  After installing a MCx VNX for a new EMC customer, the system admin asks where the latest VNX documentation can be found. What is the correct location?

  A. support.emc.com

  B. powerlink.emc.com

  C. supportinfo.emc.com

  D. elabadvisor.emc.com

  Correct Answer: A

• Question 117:

  You are about to install a VNX8000 for File. Which components should be on-site and installed?

  A. At least one Control Station Storage Processor Enclosure At least one Data Mover Enclosure At least two Standby Power Supplies At least one or more Disk Array Enclosures

  B. At least one Control Station A least one Data Mover Enclosure Disk Processor Enclosure At least one or more Disk Array Enclosures At least two Standby Power Supplies

  C. Storage Processor Enclosure At least one Standby Power Supply At least one Control Station At least one Disk Processor Enclosure At least one or more Disk Array Enclosures

  D. At least one or more Disk Array Enclosures Disk Processor Enclosure At least one Standby Power Supply At least one Data Mover Enclosure At least one Control Station

  Correct Answer: A

• Question 118:

  Refer to the exhibit.

  

  Which port is used to observe Power Up on the VNX8000?

  A. 7

  B. 6

  C. 4

  D. 3

  Correct Answer: A

• Question 119:

  You are about to install a VNX7600 Unified. Which components should be on-site and installed?

  A. At least one Data Mover Enclosure Disk Processor Enclosure At least one Control Station Optional Disk Array Enclosure

  B. At least one Data Mover Enclosure Optional Disk Array Enclosure Storage Processor Enclosure At least one Control Station

  C. Disk Processor Enclosure A least one Standby Power Supply At least one Data Mover Enclosure Optionally at least one Disk Array Enclosure

  D. At least one Control Station Storage Processor Enclosure Optionally at least one Disk Array Enclosure Disk Processor Enclosure

  Correct Answer: A

• Question 120:

  On a VNX Unified storage system, which file components are responsible for system management, access and failover?

  A. Control Stations 0 and 1; Data Movers 2 and 3

  B. Control Station 0; Data Mover 2

  C. Control Station 0; SPA,and SPB; first DAE

  D. DPE; Data Movers 2 and 3; SPA

  Correct Answer: A