EMC Legato Cert E20-361 Questions & Answers

• Question 191:

  When implementing a fabric-connected gateway system to a CLARiiON array, how many logical paths are configured to each Data Mover?

  A. 1

  B. 2

  C. 4

  D. 6

  Correct Answer: C

• Question 192:

  Which statement accurately describes a Celerra data LUNs configuration?

  A. Even-numbered RAID. group LUNs are owned by SPA

  B. LUNs are alternately owned by the storage processors

  C. LUNs within a RAID. group are owned by a single SP

  D. Odd-numbered RAID. group LUNs are owned by SPB.

  Correct Answer: B

• Question 193:

  Which statement accurately describes the configuration of the Celerra control volume LUNs on a CLARiiON storage system?

  A. All system LUNs are owned by SPA

  B. All system LUNs are owned by SPB

  C. All system LUNs are shared between SPA, and SPB

  D. Half are owned by SPA. and half are owned by SPB.

  Correct Answer: A

• Question 194:

  What is an environmental requirement for a simplified install on a single Data Mover NS system with a fabric-attached CLARiiON back-end?

  A. Enable Access Logix, enable write cache, and ensure four unused SP ports are available

  B. Enable Access Logix, enable write cache, and ensure two unused SP ports are available

  C. Enable Access Logix, enable write cache, and have a parallel connection between the Data Mover and the Control Station

  D. Enable Access Logix, enable write cache, and have at least one uncommitted zone

  Correct Answer: B

• Question 195:

  Click the Exhibit button.

  In an NS-series gateway, the code installation has failed. Based on the exhibit, what is causing this problem?

  

  A. Control Station needs to be connected to the Fibre Switch

  B. Data Movers needs to be connected to the Public Network

  C. Single connection between the Data Movers and the Fibre Switch

  D. Storage processor needs to be connected to the Private Network

  Correct Answer: C

• Question 196:

  What is an environmental requirement for a simplified install on a single Data Mover NS system with a fabric-attached CLARiiON back-end?

  A. A parallel connection between the Data Mover and the Control Station

  B. At least one uncommitted zone

  C. Ensure four unused SP ports are available

  D. Ensure two unused SP ports are available

  Correct Answer: D

• Question 197:

  Using HyperTerminal and the proper cable, you have connected your service laptop to the Control Station com port. After booting the Control Station with a non-edited boot floppy, you are now at the boot prompt.

  Which option could you choose to complete a new install of a Celerra NS?

  A. install

  B. kickstart

  C. serialinstall

  D. serialkickstart

  Correct Answer: C

• Question 198:

  Using HyperTerminal and the proper cable, you have connected your service laptop to the Control Station com port. After booting the Control Station with a boot floppy that contains the complete configuration information, which option would you select to perform a new install?

  A. install

  B. kickstart

  C. serialinstall

  D. serialkickstart

  Correct Answer: D

• Question 199:

  On a Celerra NS gateway, the system LUNs must be configured on a RAID. 5 group. Which parameters must be supported?

  A. Any 6+1 RAID. 5 group

  B. Any RAID. 5 group

  C. Dedicated 4+1 RAID. 5

  D. Dedicated 8+1 RAID. 5 group

  Correct Answer: C

• Question 200:

  Which improvement is made when converting an NS gateway system direct-connect to a fabric- connect?

  A. Data Mover availability

  B. Logical storage path availability

  C. Physical storage path availability

  D. Storage processor availability

  Correct Answer: B