1. Home
  2. EMC
  3. E20-361

Network Attached Storage (NAS) Implementation Exam

Exam Details

  • Exam Code
    :E20-361
  • Exam Name
    :Network Attached Storage (NAS) Implementation Exam
  • Certification
    :Legato Cert
  • Vendor
    :EMC
  • Total Questions
    :319 Q&As
  • Last Updated
    :Apr 29, 2025

EMC Legato Cert E20-361 Questions & Answers

  • Question 181:

    Where is the FLARE code loaded in a CLARiiON array?

    A. In the Celerra control LUNs

    B. On any user data volume

    C. On the first five disks in the array

    D. On the internal flash drive of both SPs

  • Question 182:

    Which Celerra NS component is supplied with power by the SPS?

    A. AUX SPE

    B. Control Station

    C. First Data Mover

    D. Second DAE2

  • Question 183:

    When examining the boot sequence of the Data Mover over a serial connection, what speed should be used for your HyperTerminal session?

    A. 9600

    B. 19200

    C. 57600

    D. 115200

  • Question 184:

    Which zoning method allows the storage administrator to replace an HBA. without changing the associated zoning?

    A. Host

    B. Port

    C. Server

    D. WWN

  • Question 185:

    Which CLARiiON RAID, configurations are supported with Celerra NS?

    A. RAID. 1 and RAID. 1/0

    B. RAID. 1 and RAID. 5

    C. RAID. 1/0 and RAID. 3

    D. RAID. 3 and RAID. S

  • Question 186:

    Each disk-array enclosure has a Loop (or Bus) ID. and an Enclosure ID. which is set by the Enclosure Address Switch. What are the recommended EMC. Enclosure ID. and Loop ID. for the third disk-array enclosure?

    A. Loop ID=0, Enclosure ID=0

    B. Loop ID=0, Enclosure ID=1

    C. Loop ID=1, Enclosure ID=0

    D. Loop ID=1, Enclosure ID=1

  • Question 187:

    A customer has purchased a gateway NS-series system. Which components are connected to the internal Ethernet switch?

    A. Control Station and first DAE

    B. Data Movers and Control Station

    C. Data Movers and standby power supply

    D. Data Movers and storage processor

  • Question 188:

    What provides secure, remote CLI access to the Control Station over an IP network?

    A. HyperTerm

    B. Remote Desktop

    C. SSH

    D. Telnet

  • Question 189:

    How many logical paths are configured to each Data Mover when implementing a fabric-connected gateway system attached to a CLARiiON?

    A. 1

    B. 2

    C. 4

    D. 6

  • Question 190:

    When implementing a dual Data Mover fabric-connected to a gateway system, how many Data Mover ports are zoned to each CLARiiON SP port?

    A. 1

    B. 2

    C. 4

    D. 6

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only EMC exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your E20-361 exam preparations and EMC certification application, do not hesitate to visit our Vcedump.com to find your solutions here.