Video motion detection (VMD) in a PTZ camera
A. Is not possible since the camera will activate the VMD every time it is moving.
B. Can be used but only when the camera is used as a stationary camera.
C. Can be used since the camera is aborting the VMD during movement.
D. Is no different compared to a fix camera, since the Axis chip can detect in three dimensions.
Incorrect colors due to faulty calibration or configuration may result in
A. False representation of video footage.
B. Limiting the possibility of sufficient pixel density for facial recognition.
C. Increasing bandwidth due to high levels of noise.
D. The camera automatically switching to black and white mode.
The advantage of using multicast in the network is that
A. Many cameras can share the same network connection.
B. The video stream reaches every computer in the network simultaneously.
C. The video stream only needs to be sent once, even though there are multiple viewers.
D. The video stream is rerouted in case of network dropout.
Using AXIS Camera Management, which of the following can be performed? (Choose two)
A. Apply templates to devices
B. View recorded video
C. Upgrade firmware
D. Set motion detection windows
E. Configure crossline detection
When zooming in on an object with varifocal or zoom lens, light sensitivity of the camera is
A. increasing
B. decreasing
C. the same
D. dependent on lens
IP51 and IP52 means that the camera
A. Can be placed in or outdoors.
B. Is resistant to dust and dripping water.
C. Is vandal resistant.
D. Is designed for tough environments.
While setting up an AXIS Q7404 Video Encoder for control of an analog PTZ using Pelco D protocol, you run into a problem. After uploading of the proper Pelco drivers into the AXIS Q7404 Video Encoder you find that channel 1 is controlling the wrong analog PTZ. Which option below would you adjust to fix this problem so you can avoid changing physical cables?
A. IP address
B. Device ID
C. Baud rate
D. Device type
Gatekeeper is a function that
A. Makes it possible for a PTZ camera to do a guard tour.
B. Enables two way audio for communication at a gate.
C. Uses video motion detection for detecting if a gate is open.
D. Uses video motion to zoom in on an object.
Increased noise levels in a scene will increase the
A. Light sensitivity.
B. Contrast level.
C. Bandwidth usage.
D. Brightness level.
If a surveillance camera is installed in an environment with fluorescent lighting, which effect may this have on the video quality?
A. Increased color saturation
B. Flickering effects on video
C. Increased random noise
D. Motion blur on moving objects
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Axis Communications exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your AX0-100 exam preparations and Axis Communications certification application, do not hesitate to visit our Vcedump.com to find your solutions here.