To get the best accuracy for a people counting application for customers entering a store, the camera should be mounted
A. Facing the entrance.
B. Facing the entrance at eye level.
C. Directly above the entrance.
D. Facing away from the entrance.
What is the most effective and time saving way to adjust the focus on the AXIS M3204 camera while onsite?
A. Remote zoom and focus feature
B. Adjust back focus
C. AXIS T8414 Installation Display
D. AXIS Camera Management
Outdoor ready cameras in the AXIS Q60 Series typically works with 60 W PoE, if we connect it to 30W PoE it will
A. Work for a limited time.
B. Give picture but impossible to pan and tilt.
C. Work but with limited temperature specification.
D. Work but with limited pan and tilt speed.
Which of the following statements is a recommended best practice for outdoor installations of Axis cameras?
A. Connect cameras and end points (midspan, endspan. network switch or hub) with Category 5e UTP cable
B. Ensure that a surge suppressor is installed in front of each camera
C. Ensure that the end points are properly grounded
D. Connect a UPS to the network switch
What is most important for 24 hour License Plate Recognition of fast moving cars?
A. PoE
B. Processing speed
C. IR light
D. Interlaced scanning
Which statements on Group of video (GOV) length are true? (Choose two)
A. The GOV length can be adjusted in both Motion JPEG and H.264
B. The GOV length setting only has an impact on MPEG-4
C. The GOV length setting is only used for recording
D. The GOV length setting has an impact on bandwidth
E. A long GOV length increases the storage time on SD card
An installer is upgrading an installation with several analog PTZ cameras using Axis Q-line encoders. Which of the following options should be checked before proceeding?
A. That the SD card is supported
B. That H.264 compression is supported
C. That both D1 and 4CIF resolution are supported
D. That the PTZ driver is supported
When using IR illuminators, which wavelengths would not produce any visible glow?
A. 650 nm
B. 750 nm
C. 850 nm
D. 940 nm
When focusing a camera with auto iris, focus will be more accurate if
A. Set during lowlight conditions, since the depth of field is shorter with a large iris opening.
B. Set during bright conditions, since the depth of field is shorter with a small iris opening.
C. Set during lowlight conditions, since the automatic gain control will increase image contrast.
D. Set during bright conditions, since image contrast will not be reduced by the automatic gain control.
When using the view area functionality, each view area has its own video stream and (Choose two)
A. Exposure control setting
B. Text overlay setting
C. User credentials
D. PTZ setting
E. Compression algorithm setting
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Axis Communications exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your AX0-100 exam preparations and Axis Communications certification application, do not hesitate to visit our Vcedump.com to find your solutions here.