Exam Details

  • Exam Code
    :AX0-100
  • Exam Name
    :Axis Network Video
  • Certification
    :Axis Communications Certifications
  • Vendor
    :Axis Communications
  • Total Questions
    :150 Q&As
  • Last Updated
    :Jul 02, 2025

Axis Communications Axis Communications Certifications AX0-100 Questions & Answers

  • Question 101:

    Which statement is true for broadcast network traffic?

    A. Broadcast is designed to enable optimized video transmission, since it tolerates network dropouts

    B. Broadcast is not practical for network video transmission, since packets are transmitted to every device on the network

    C. Broadcast is a method for sending video to many recipients over the internet even though their bandwidths vary

    D. Broadcast data packet length is longer than normal Ethernet packets, to accommodate a full video frame

  • Question 102:

    Image flickering is caused by

    A. IR light

    B. White light

    C. Lack of light

    D. Fluorescent light

  • Question 103:

    Before upgrading firmware, which of the following should be checked?

    A. Verify that the Video Management Software (VMS) supports the latest firmware version

    B. Verify that both rack mounted and standalone servers support the latest firmware version

    C. Verify that the IEEE 802.3af compliant PoE switch supports the latest firmware version

    D. Verify that the SD card is properly ejected before the upgrade is started

  • Question 104:

    Working with the end user, you find that they need a cost-effective mini dome with a varifocal lens. DC-iris and audio capabilities are not required. Which of the following products would best fit the requirements?

    A. AXIS P3343

    B. AXIS P3301

    C. AXIS M1113

    D. AXIS M3204

  • Question 105:

    After an installer sets up a motion detection window they then zoom out the camera. How will this affect the camera's ability to detect motion if no settings are changed?

    A. More pixels are needed to change to trigger motion detection

    B. Less pixels are needed to change to trigger motion detection

    C. More movement needed to change to trigger motion detection D. Less movement needed to change to trigger motion detection

  • Question 106:

    A customer is not getting the storage retention they had expected while using H.264 with an AXIS Q6034-E PTZ camera on a continuous guard tour. What is the most likely cause of the problem?

    A. The estimation was only planned for a 720p HDTV PTZ

    B. Using continuous guard tour does not let H.264 save as much on the compression

    C. Because most of the areas in the guard tour are empty. H.264 cannot save as much on the compression

    D. The estimations were done in MPEG-4 and they should change the AXIS Q6034-E to run in MPEG-4 instead of H.264

  • Question 107:

    In what way does VAPIX ?help integrators?

    A. It offers a multi-language tutorial for implementation of analytics

    B. It improves efficiency when implementing multi-camera tracking

    C. It connects products to automatically upgrade products with the latest firmware

    D. The openness helps integrate Axis products with other system components

  • Question 108:

    A customer wants his video surveillance system to completely cover the perimeter of his property. For the installer to ensure that the camera system is not subject to sabotage, he should

    A. Install more low-priced cameras to cover the complete site.

    B. Make sure each camera is seen by at least one other camera.

    C. Use PoE, and not a PoE splitter.

    D. Install thermal cameras.

  • Question 109:

    Increase of bandwidth and storage can be a result of (Choose two)

    A. Changing from Motion JPEG to H.264.

    B. Arctic Temperature Control.

    C. High noise level.

    D. The use of High PoE.

    E. Image resolution.

  • Question 110:

    A camera lens with a low f-stop value of 1.2 will outperform a lens with a higher f- stop value due to which one of the parameters below?

    A. Better depth of field

    B. Better low light capability

    C. Improved sharpness

    D. Less image artifacts

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Axis Communications exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your AX0-100 exam preparations and Axis Communications certification application, do not hesitate to visit our Vcedump.com to find your solutions here.