Exam Details

  • Exam Code
    :ACMP_6.3
  • Exam Name
    :Aruba Certified Mobility Professional 6.3
  • Certification
    :HP Certifications
  • Vendor
    :HP
  • Total Questions
    :165 Q&As
  • Last Updated
    :Jun 22, 2025

HP HP Certifications ACMP_6.3 Questions & Answers

  • Question 61:

    Centralized licensing is not enabled in a network of 1 Master and 2 Local controllers, what should be the license count on all controllers to terminate 8 APs on each Local controller and support Local redundancy?

    A. 16 AP license on all controllers

    B. 8 AP license on Master and 16 AP license on both locals

    C. 8 AP license on all controllers

    D. 1 AP license on Master and 16 AP license on both locals

    E. 16 AP licenses on the Locals

  • Question 62:

    A 3200 controller has 16 AP licenses,16 PEF-NG licenses, 16 RFProtect licenses. There are 10 Campus APs terminating on the controller. How many remote AP's can terminate on the controller?

    A. 6

    B. 12

    C. 16

    D. 24

    E. 32

  • Question 63:

    A 3600 controller has 64 PEF-NG license, 128 AP licenses and 1 RFProtect license. How many AP's can terminate on the controller?

    A. 1 Campus APs

    B. 64 Campus APs

    C. 128 Remote APs

    D. 256 Remote APs

    E. 512 Remote APs

  • Question 64:

    An AP was configured and assigned to an AP group then powered off for over a week. When the AP is redeployed, what previous configuration will it retain?

    A. It's AP name and AP Group

    B. It's Serial Number

    C. The controller's IP address

    D. After a few days all configurations are lost

    E. The controller IP address and the AP Group

  • Question 65:

    How is an AP redirected to a Local controller after DNS resolution returns the Master's IP address?

    A. Master looks at the AP-Group and CONTROLLER-IP attributes

    B. Master looks at the AP-Group and LMS-IP attributes

    C. In the AP-provisioning screen, the LMS-IP attribute must be set

    D. The AP must be statically configured to find the local controller

    E. In the AP-provisioning screen, set the CONTROLLER-IP attribute

  • Question 66:

    An AP is not communicating with the controller. Upon investigation you find that the AP is not discovering its controller through DNS. Instead, it received a DHCP reply with option 43 specifying the SIP server's IP address. How do you resolve this problem?

    A. Statically configure the AP to ignore Option 43

    B. Remove the option 43 configuration on the DHCP server

    C. Statically configure the AP to only use DNS resolution and not other dynamic discovery methods

    D. After failing option 43 the AP should have proceeded with ADP, therefore the AP is faulty and needs to be replaced

    E. The AP should be purged

  • Question 67:

    When APs boot up, in which order do they discover a controller?

    A. DNS, DHCP, ADP multicast, ADP unicast, static

    B. static, DNS, DHCP, ADP broadcast, ADP multicast

    C. static, DHCP, ADP multicast, ADP broadcast, DNS

    D. static, DHCP, DNS, ADP multicast, ADP broadcast

    E. DNS, static, ADP multicast, ADP broadcast

  • Question 68:

    Which method can APs use to discover a controller?

    A. DHCP

    B. Dynamic DNS (DDNS)

    C. PnP

    D. PAPI

    E. HTTPS

  • Question 69:

    A port on a controller has been configured as untrusted. No wired access AAA profile or Global AAA profile

    is configured. When a user connects to that port which of the following statements is true?

    A. Since there is no wired access AAA profile, only port policies will be applied

    B. The user will fall into the default wired access AAA profile and will be given the initial role.

    C. Since there is no wired access AAA profile or Global AAA profile the user will be given the logon role.

    D. When configuring the port as untrusted, an error message of "no wired access AAA profile exists" Therefore this is an invalid configuration.

    E. the user is denied all access automatically because no wired access AAA or Global AAA profile is assigned.

  • Question 70:

    A wired device is connected to an untrusted port on a controller. How can a role be assigned to the device?

    A. An initial Role can be assigned directly to the VLAN

    B. Roles are assigned to devices connected to a trusted port

    C. A default Role can be directly assigned to an untrusted port

    D. Adding a wired AAA profile to a VLAN on the untrusted port

    E. The Role assigned to the untrusted port

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only HP exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your ACMP_6.3 exam preparations and HP certification application, do not hesitate to visit our Vcedump.com to find your solutions here.