Exam Details

  • Exam Code
    :4A0-101
  • Exam Name
    :Nokia Interior Routing Protocols
  • Certification
    :Nokia Certifications
  • Vendor
    :Nokia
  • Total Questions
    :315 Q&As
  • Last Updated
    :May 03, 2025

Nokia Nokia Certifications 4A0-101 Questions & Answers

  • Question 131:

    Click on the exhibit.

    All ports in the network are operationally up and have a speed of 1Gbps.

    Which of the following is TRUE?

    A. Data traffic from network 192.168.1.0/24 to 192.168.3.0/24 will be forwarded through router R2.

    B. Data traffic from network 192.168.3.0/24 to 192.168.1.0/24 will be forwarded through router R2.

    C. The system interface of routers R1 and R3 must be included into OSPF for traffic to flow between the 192.168.1.0/24 and 192.168.3.0/24 networks.

    D. The OSPF adjacency between router R1 and router R3 is operationally down.

  • Question 132:

    A static route needs to be configured with a next-hop that is NOT directly connected to the router. Which of the following must be TRUE?

    A. The router must also have an active static route to the next-hop specified in the static route command.

    B. The system address of the next-hop router must be included in the static route command.

    C. The command option "indirect" must be used in the static-route command.

    D. The system address of the router connected to the destination must be included in the static route command

  • Question 133:

    Click on the exhibit.

    Router R1 distributes its globally routed address and its loopbacks into IS-IS. Routers R2 and R4 have their globally routed addresses in IS-IS.

    How many routes will router R4 have in its IPv6 route table?

    A. 2

    B. 3

    C. 4

    D. 5

    E. 6

    F. 7

  • Question 134:

    Click on the exhibit.

    A static route has been configured on router R1 to reach the PC at 139.120.121.2. What might be causing the ping to fail?

    A. Router R2 needs a static route to the PC.

    B. Router R2 needs a default to router R1.

    C. Router R1 needs a default route to router R2.

    D. The static route should use a next-hop of 172.31.1.2

  • Question 135:

    Which of the following is FALSE regarding link-state protocols?

    A. Each router constructs its own link-state database with updates received from neighbors.

    B. When a router performs an SPF computation, it sends the results to its neighbors.

    C. An SPF computation is done by each router to determine the best path to destination prefixes

    D. The link-state database is identical for all routers in a single area routing domain.

  • Question 136:

    When multiple routing protocols offer a route for the same prefix, what part of the router is in charge of deciding which route to make active?

    A. The routing information base (RIB).

    B. The routing table manager (RTM).

    C. The equal cost multipath configuration (ECMP).

    D. The forwarding information base (FIB).

    E. The link state database (LSDB).

  • Question 137:

    Which part of the NSAP address is used to indicate to the end system that a packet is to be processed by the router itself?

    A. AFI

    B. IDI

    C. HO-DSP

    D. NSEL

  • Question 138:

    On which type of IS-IS router is summarization most likely to be configured?

    A. L1 routers

    B. L2 routers

    C. L1/L2 routers

    D. L1 and L2 routers

  • Question 139:

    Which of the following statements concerning OSPFv3 is false?

    A. MD5 Authentication is not supported.

    B. Router LSAs do not carry IPv6 prefix information

    C. NSSA is not supported in OSPFv3.

    D. OSPFv3 uses a 32-bit router ID.

  • Question 140:

    A router receives an OSPF database description packet from a neighbor that references an LSA, which is already in the router's LSDB. The sequence number in the DBD packet is lower than the sequence number of the LSA in the LSDB.

    What action does the router take?

    A. The router sends a link-state update to its neighbor.

    B. The router sends a link-state acknowledgement to its neighbor.

    C. The router updates the information in its LSDB with the information received from its neighbor.

    D. The router sends a link-state request to its neighbor.

    E. The router takes no action.

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Nokia exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 4A0-101 exam preparations and Nokia certification application, do not hesitate to visit our Vcedump.com to find your solutions here.