Avaya Avaya Certifications 3100.1 Questions & Answers

• Question 21:

  You must set the calling privileges for a user so that the user can make calls but not receive calls. You assign COR to the user's station. What other settings must be completed?

  A. In COR 5, set calling party restriction = `origination' and called party restriction = `none'

  B. In COR 5, set calling party restriction = `outward' and called party restriction = `termination'

  C. In COR 5, set calling party restriction = `origination' and called party restriction = `termination'

  D. In COR 5, set calling party restriction = `none' and called party restrictions = `termination'

  Correct Answer: D

• Question 22:

  You must verify in a production system that the number of rings between each point for coverage paths is two rings. You access the system-parameters coverage-forwarding from and check that the value for the local coverage Subsequent

  Redirection/ CFWD No Answer interval field is set to 2.

  Which users will be affected by this setting?

  A. users belonging to a specific COR

  B. users belonging to a specific COS

  C. users belonging to a specific COS-group

  D. all users in the system

  Correct Answer: D

• Question 23:

  Scenario

  A user reports that when attempting to dial an external call to local number the system does nothing ?just silence.

  You interview the user as follows.

  You: What happens if you longer after you dial your number? User: once I waited for about half a minute, then I heard these tones that supported the something was wrong.

  You: Did the sound stay on the same pitch or did it change pitches back and forth? User: Back and forth one pitch higher than the other.

  You: OK, that helps. What did you dial to get an outside line? User: Nine (9)

  You: Thank you, I appreciate the information, I will get back with you shortly.

  

  With reference to the scenario shown in the exhibit, which action should you take?

  A. Re-administer the Dial Plan to requiring 10 digits for making local external calls

  B. Determine the correct Feature Access Code to make an external call and inform the user

  C. Re-administer the feature access code for the user's situation to dial `9' to make an external call.

  D. Do nothing to the Dial Plan but delete the "*" Feature Access Code

  Correct Answer: A

• Question 24:

  For which purpose is Automatic Alternate Routing (AAR) used?

  A. Calls placed within a company over a public network

  B. Calls placed within a company over a private network

  C. Calls placed from outside a company over a private network

  D. Calls placed from outside a company over a public network

  Correct Answer: B

• Question 25:

  Which command must be used to define the system internal number scheme of the extensions?

  A. Change diaplan parameters

  B. Change node-name IP

  C. Change dialplan analysis

  D. Change uniform-dialplan

  Correct Answer: C

• Question 26:

  Your customer does not use an AAA server. You have been asked to add four new administrative users with a new user profile that has display only access and no maintenance for the same categories as profile 20. Which interface must be used?

  A. ASA with GED1

  B. ASA with terminal emulation

  C. SMI

  D. SMI or ASA

  Correct Answer: B

• Question 27:

  Security Violation show valid and invalid attempts to access the system using three types of codes. In addition to station security codes, which two types of codes are measured in security Violation reports? (Choose two)

  A. barrier codes

  B. access security gateway (ASG) codes

  C. dial access codes (DAC)

  D. authorization codes

  E. administrative login codes

  Correct Answer: AD

• Question 28:

  Your customer had a short WAN outage and you want to know If all of the gateways have re- registered with the Communication Manager server. Which Interface and command must be used?

  A. ASA with a display process-status command

  B. SMI with a process status command

  C. SMI with a status summary command

  D. ASA with a status media-gateway command

  Correct Answer: D

• Question 29:

  All release ox and later Avaya Aura?Communication Manager (CM) deployments support secure link access:

  SAL for remote access to the server and alarm notification from the server to the support engineer? Which hardware or software is required at the customer site for SAL support of the CM server?

  A. SAL software is required and uses a separate SAL server.

  B. SAL software is required and uses a secure external modem.

  C. SAL software is part of System Platform and requires no additional hardware.

  D. SAL software is part of System Platform and uses a remote maintenance board (RMB) that must be installed in the server.

  Correct Answer: A

• Question 30:

  You are adding five new digital stations in a branch office where there is a G450 media Gateway. On which media Module do you look for available ports?

  A. MM71

  B. MM711

  C. MM712

  D. MM714

  Correct Answer: C