Q57
Single choice
Refer to the exhibit.
R5#show run | s router ospf
router ospf 1
router-id 172.16.0.5
network 192.168.0.0 0.0.63.255 area 0
R5#show run int GigabitEthernet1.58
Building configuration....
Current configuration: 245 bytes
interface GigabitEthernet1.58
description LINK TO R8 Gi1.58 encapsulation dot1Q 58
ip address 192.168.58.5 255.255.255.0
ip mtu 1600
ip ospf network point-to-point
ip ospf 1 area 0.0.0.2
end
Which configuration must be implemented on router R8 so that it will establish OSPF adjacency with R5?