Free 300-620 Web TestEngine Demo

Q3 Single choice

Refer to the exhibit.

A customer is deploying a WAN with these requirements:

1. Routers 1 and 2 must receive only routes 192.168.11.0/24 and 192.168.21.0/24 from the Cisco ACI fabric.
2. Reachability to the WAN users must be permitted only for the servers that are located in vrf_prod.

Which settings must be configured to meet these objectives?

A
Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Private to VRF.
Configure the subnet 192.168.31.0/24 as Advertised Externally.
Configure an EPG subnet 0.0.0.0/0 as Shared Route Control Subnet.
B
Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Private to VRF.
Configure the subnet 192.168.31.0/24 as Advertised Externally.
Configure an EPG subnet 0.0.0.0/0 as External Subnets for External EPG.
C
Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Advertised Externally.
Configure the subnet 192.168.31.0/24 as Private to VRF.
Configure an EPG subnet 0.0.0.0/0 as External Subnets for External EPG.
D
Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Advertised Externally.
Configure the subnet 192.168.31.0/24 as Private to VRF.
Configure an EPG subnet 0.0.0.0/0 as Shared Route Control Subnet.

300-620 Web TestEngine demo