Free 300-410 Web TestEngine Demo | VCEDump

Exit VCEDump 300-410 Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Q94 Single choice

A customer requested a GRE tunnel through the provider network between two customer sites using loopback to hide internal networks.

Which configuration on R2 establishes the tunnel with R1?

A
R2(config)#interface Tunnel1
R2(config-if)#ip address 172.20.1.2 255.255.255.0
R2(config-if)#ip mtu 1500
R2(config-if}#ip tcp adjust-mss 1360
R2(config-if)#tunnel source 192.168.20.1
R2(config-if)#tunnel destination 10.10.1.1
B
R2(config)#interface Tunnel1
R2(config-if)#ip address 172.20.1.2 255.255.255.0
R2(config-if)#ip mtu 1400
R2(config-if)#ip tcp adjust-mss 1360
R2(config-if)#tunnel source 192.168.20.1
R2(config-if)#tunnel destination 192.168.10.1
C
R2(config)#interface Tunnel1
R2(config-if)#ip address 172.20.1.2 255.255.255.0
R2(config-if)#ip mtu 1400
R2(config-if)#ip tcp adjust-mss 1360
R2(config-if)#tunnel source 10.10.2.2
R2(config-if)#tunnel destination 10.10.1.1
D
R2(config)#interface Tunnel1
R2(config-if)#ip address 172.20.1.2 255.255.255.0
R2(config-if)#ip mtu 1500
R2(config-if)#ip tcp adjust-mss 1360
R2(config-if)#tunnel source 10.10.2.2
R2(config-if)#tunnel destination 10.10.1.1

Previous Check answer

Question map94 / 100

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

Current Correct Answered Incorrectly Reviewed 0 Remaining 100

Marked Questions0

No marked questions.

Answered Incorrectly0

No incorrect answers.