An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event. Which storage optimizations should the administrator set to meet the requirements?
-
A
-
B
Deduplication and Erasure Coding
-
C
Compressoion and Deduplication
-
D
Compression Deduplication and Erasure Coding
Reveal answer details
Close answer details
Which type of data is distributed by Zookeeper to ensure availability in the case of node or block failure?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 3
Multiple choice
A system administrator needs to add more VMs to their Nutanix cluster. Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two)
-
A
Enable Deduplication and Ensure Coding
-
B
Utilize Optimize Resources for VM efficiency
-
C
Determine utilization with Cluster Runway
-
D
Perform an inventory with Life Cycle Management
Reveal answer details
Close answer details
An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container space for each application. How should the administrator meet this requirement?
-
A
Create one container and set capacity reservation
-
B
Create two containers and reserve space for containers
-
C
Create one container and enable compression
-
D
Create two containers and reserve space for vDisks
Reveal answer details
Close answer details
Correct answerD
ExplanationReferences: https://portal.nutanix.com/page/documents/details?targetId=Web_Console_Guide-NOS_v4_0:wc_security_authentication_wc_t.html
How should an administrator enable secure access to Volumes using a password?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Correct answerB
ExplanationExplanation: https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism- v50:wc-block-services-enabling-t.html Provision storage on the Nutanix cluster by creating a volume group. Create a client whitelist to enable access to the volume group by using the IP addresses or client initiator IQNs in a whitelist (as part of the volume group configuration). Create a secret for the volume group if you are using CHAP authentication.
Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?
-
A
Disable encryption on the cluster
-
B
Deploy an additional Native KMS Server
-
C
Enable encryption for a VM
-
D
Change Native KMS to External KMS
Reveal answer details
Close answer details
Correct answerD
ExplanationReferences: https://next.nutanix.com/blog-40/security-with-simplicity-encryption-for-your-data-with-1-click-28225
Question 7
Multiple choice
Which three statements are true about Agent VMs? (Choose three.)
-
A
An Agent VM is automatically migrated to another host
-
B
Agent VMs are never migrated to another host
-
C
Agent VMs are powered on before other VMs
-
D
Agent VMs are powered off if an HA event occurs
-
E
A running Agent VM can be moved to another host
Reveal answer details
Close answer details
An administrator has a 4-node Nutanix cluster running on AHV. The administrator creates a new storage container and makes that all available to all hosts. Which storage protocol is used for Virtual Machines to access virtual disks on the storage container?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 9
Multiple choice
Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)
-
A
Deploy the Move appliance.
-
B
-
C
Import the .vmdk into the Image Service.
-
D
Use shared nothing live migration.
Reveal answer details
Close answer details
Question 10
Multiple choice
An administrator wants to configure key based SSH access for an AOS 5.5 Implementation. Which three components can be secured using this method? (Choose three)
-
A
-
B
-
C
-
D
-
E
Reveal answer details
Close answer details
Question 11
Single choice
An administrator is creating a Protection Domain to back up multiple application environments. Which mechanism does Nutanix use to aggregate VMs with common backup and restore objectives?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 12
Multiple choice
Which two private key types are supported by the Nutanix SSL certificate implementation? (Choose two.)
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 13
Single choice
In an AHV cluster, an administrator needs to enable an application to share a disk b group but needs to enable the VMs to see the volume group. How should the administrator accomplish this task?
-
A
Create a shared folder for the VMs using Nutanix Files.
-
B
Add the volume group to the VM using the update link from the VM dashboard.
-
C
Configure a virtual disk on each VM with identical attributes in the storage dashboard.
-
D
Add a disk to one VM and enable read/write on it from the other VM.
Reveal answer details
Close answer details
Question 14
Single choice
A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk. What are these vDisk copies called?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 15
Single choice
On nutanix cluster in which distribution is open ldap authentication management system?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Correct answerD
ExplanationExplanation: ?OpenLDAP: OpenLDAP is a free, open source directory service, which uses the Lightweight Directory Access Protocol (LDAP). developed by the OpenLDAP project. Nutanix currently supports the OpenLDAP 2.4 release running on CentOS distributions only.
Question 16
Single choice
Where can an administrator change a CVM password?
-
A
-
B
CVM setting in Prism Element
-
C
CVM setting in Prism Central
-
D
Reveal answer details
Close answer details
Correct answerD
ExplanationReferences: https://next.nutanix.com/installation-configuration-23/modifying-passwords-in-nutanix-environment-33538
Question 17
Single choice
The administrator wants a container to be displayed and limited to 1TB in the hypervisor. What advanced container setting must the administrator set?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 18
Single choice
Two HDDs fail simultaneously on a single AHV host. What are the chances of data loss?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Correct answerA
ExplanationReferences: https://next.nutanix.com/prism-infrastructure-management-26/nutanix-fault-tolerance- QUESTION NO:-33903 Reference: (https://hyperhci.com/2020/01/10/configure-nutanix-virtual-network-with-ipam/)
Question 19
Single choice
What is the maximum number of tested and supported vDisks (including snapshots) that is a Nutanix cluster can maintain?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Correct answerD
ExplanationExplanation: https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v58:app-system-maximums-r.html
Question 20
Multiple choice
What does an administrator do before shutdown nutanix node for maintenance in the cluster? (Choose two)
-
A
verify data resiliency status in the cluster
-
B
-
C
migrate all guests vm from the host
-
D
shutdown the cluster in that host
Reveal answer details
Close answer details
Question 21
Single choice
An administrator is configuring protection domains to support a business-critical application. The business can sustain a maximum of 40 minutes of data loss for this application. Which value should the administrator configure for the snapshot frequency of the protection domain?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 22
Multiple choice
An administrator wants to create a trunked interface on a VM on AOS 5.15x. Which two steps should the administrator take first to achieve this? (Choose two)
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Correct answersA, C
ExplanationExplanation: Explanation/Reference: References: https://vmwaremine.com/2019/05/09/enable-vlan-trunking-on-nutanix-ahv-vm/#sthash.3uIAHeXZ.dpbs
Question 23
Multiple choice
In respective to 1 GbE and 10 GbE interfaces (physical host), which statements are true?
-
A
Do not include the 1 GbE interlaces in the same bond as the 10 GbE interlaces. Also, to avoid loops, do not add the 1 GbE interlaces to bridge brO, either individually or in a second bond. Use them on other bridges.
-
B
If you want to use the 1 GbE interfaces for guest VM connectivity, follow the hypervisor manulacturer's switch '-- port and networking configuration guidelines.
-
C
If you want to use the 10 GbE interfaces for guest VM traffic, make sure that the guest VMs do not use the VLAN over which the Controller VM and hypervisor communicate.
Reveal answer details
Close answer details
Question 24
Multiple choice
An administrator needs to convert an existing node to be a Compute Only node. Which two steps should the administrator take? (Choose two.)
-
A
-
B
Enable CO mode using aCLI
-
C
Image the node as CO using Foundation
-
D
Add the node to the cluster using Prism Element
Reveal answer details
Close answer details
Question 25
Single choice
What is the maximum RPO that can be configured for VMs using the Near Sync feature?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 26
Single choice
For a single VM, which AHV bond mode would leverage all available uplink bandwidth?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 27
Multiple choice
An administrator has set up a local web server accessible to the Nutanix clusters. Which two steps are required to set up LCM for an environment without Internet access? (Choose two.)
-
A
Download the lcai_disconnecced_version. tar.gz LCM bundle from the support portal.
-
B
Edit LCM Advanced Settings in Prism Element and enter the address of the web server.
-
C
Edit LCM Advanced Settings m Prism Central and enter the address of the web server.
-
D
Download the lcm_dark_site_version. tar . gz LCM bundle from the support portal.
Reveal answer details
Close answer details
Question 28
Single choice
Which Nutanix cluster service manages VM access to the Distributed Storage Fabric?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 29
Single choice
An AHV administrator wants to take advantage of maximized network throughput and redundancy for the default bond on some nodes. Which action should the administrator perform?
-
A
Add additional 10Gb interfaces.
-
B
Determine which IP addresses to use.
-
C
Remove any 1Gb interfaces.
-
D
Set default bond to use Active-Backup.
Reveal answer details
Close answer details
Question 30
Single choice
An administrator needs to power down an AHV node in order to replace a failed DIMM. Which step should the administrator take after placing the node into maintenance mode?
-
A
Execute the command cluster status
-
B
-
C
Shut Down the nutanix CVM
-
D
Reveal answer details
Close answer details
Question 31
Multiple choice
What are the two effects of using Data-at-Rest Encryption on a Nutanix cluster? (Choose two.)
-
A
Software-based Data-at-Rest Encryption cannot be disabled.
-
B
An External KMS server must exist outside of the encrypted cluster.
-
C
Native KMS requires minimum of a four-node cluster.
-
D
Encryption is only supported on an empty cluster.
Reveal answer details
Close answer details
Question 32
Multiple choice
Which two targets are valid options when selecting a remote site to Prism? (Choose Two)
-
A
-
B
-
C
-
D
-
E
Reveal answer details
Close answer details
Question 33
Single choice
What are the resource requirements for a single small Prism Central instance?
-
A
4 vCPUs. 16 GB of memory, and 400 GiB of storage
-
B
2 vCPUs, 8 GB of memory, and 500 GiB o* storage
-
C
4 vCPUs, 16 GB of memory, and 500 GiB of storage
-
D
8 vCPUs. 32 GB of memory, and 500 GiB of storage
Reveal answer details
Close answer details
Question 34
Single choice
Which Nutanix Product combines the Distributed Storage Fabric & App Mobility Fabric?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 35
Single choice
An administrator needs to provide iSCSI storage to a VM on the nutanix cluster running ESXi. Which native nutanix feature should be leveraged to meet this requirement?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
Question 36
Single choice
In the event of failed CVM, what happens to the physically attached storage for the node and the VMs running on it?
-
A
The drives for that node are inaccessible. The VMs reboot.
-
B
The drives for that node are inaccessible. The VMs continue to run.
-
C
The hypervisor regains control of the drives. VMs on that node reboot.
-
D
The hypervisor regain control of the drives. VMs on that node continue to run.
Reveal answer details
Close answer details
Question 37
Single choice
An administrator creates a new VM, but it cannot be accessed over the network. When the administrator opens a console in the VM dashboard, the guest OS seems to be configured correctly. However, it can only ping 127.0.0.x addresses. What is the likely issue?
-
A
The VLAN configuration is incorrect.
-
B
A volume group must be attached to the VM.
-
C
Guest VM firewall is preventing outbound SSH connections.
-
D
There is no network on the cluster.
Reveal answer details
Close answer details
Question 38
Single choice
What command is used to run the nutanix cluster checks from the CVM CLI?
-
A
-
B
-
C
ncc check_all health_options
-
D
Reveal answer details
Close answer details
Question 39
Multiple choice
An administrator needs to take a single node down for maintenance. Which two steps should the administrator take? (Choose two)
-
A
Make sure Auto Evacuation is enabled
-
B
Shut down or live migrate all VMs off of the node.
-
C
Verify the data resiliency status of the cluster.
-
D
Reclaim the licenses to the Nutanix Support Portal.
Reveal answer details
Close answer details
Correct answersB, C
ExplanationExplanation: https://portal.nutanix.com/page/documents/details/?targetId=AHV-Admin-Guide-v51:AHV-Admin-Guide-v51
Question 40
Single choice
How should an administrator make sure that the LCM Framework is always up to date and upgraded to the latest version?
-
A
From the Life Cycle Management page in Prism Element, click Perform Inventory, then edit settings and set LCM Auto Inventory to Daily
-
B
From the Life Cycle Management page in Prism Central, click Perform Inventory, then edit settings and click the Enable LCM Auto Inventory checkbox
-
C
From the Life Cycle Management page in Prism Element, click Perform Inventory, then edit settings and click the Enable LCM Auto Inventory checkbox
-
D
From the Life Cycle Management page in Prism Central, click Perform Inventory every morning
Reveal answer details
Close answer details
Correct answerD
ExplanationReferences: https://next.nutanix.com/how-it-works-22/nutanix-upgrade-order-37917
Question 41
Single choice
An administrator is restarting a node and the CVM has not automatically restarted. Which command should be used to start the CVM?
-
A
-
B
virsh start block-ID-(Node Letter)
-
C
cvm start block-ID-(Node Letter)
-
D
Reveal answer details
Close answer details
Question 42
Single choice
Which data savings technique utilizes stripes and parity calculation in a Nutanix cluster?
-
A
-
B
-
C
-
D
Reveal answer details
Close answer details
|