Free JN0-650 Exam Dumps Preview

You are deploying IP phones in your enterprise networks.

When plugged in, the IP phones must automatically be provided with their geographic location details by the EX Series switches.

In this scenario, which protocol should be used to enable this behavior?

Remote provider edges need membership and tunnel information to deliver broadcast, unknown-unicast, and multicast traffic for an EVPN broadcast domain. Which route supplies it?

You have determined that traffic in your network is being routed through your route reflector instead of using the optimal path.

Referring to the exhibit, what are two configuration changes on the route reflector that would solve the problem? (Choose two.)

One access interface serves both 802.1X-capable endpoints and devices that cannot act as supplicants. Which method policy is sound?

An IP packet leaves through an interface with a DSCP rewrite rule. What should determine the outgoing DSCP value?

Your router is discarding an EBGP route because the next hop is not directly connected.

Which BGP configuration would you use to override this behavior?

You have several switches in your network that use Cisco's PVST + protocol. You want your Juniper switches to interoperate with those devices.

In this scenario, which protocol would you use?

Click the Exhibit button.

Referring to the exhibit, leaf2 is elected the designated forwarder.

Which two statements are correct if server2 generates a broadcast frame? (Choose two.)

Click the Exhibit button.

You configured MVRP in your Layer 2 network using the configuration shown in the exhibit. You verified that the appropriate VLANs are configured and applied on the two access switches. You are using RSTP as your loop prevention mechanism. Unfortunately, the users are not able to communicate with their corresponding server attached to the Access-2 switch.

In this scenario, what should you do to solve this problem?

A switch must tell a directly connected IP telephone which voice VLAN and traffic marking to use. Both devices support the required extensions. Which mechanism carries this media-specific network policy?

You want to dynamically have devices discover VLANs and have enabled MVRP.

Which statement is correct in this scenario?

Click the Exhibit button.

Referring to the exhibit output, which statement is correct?

You are deploying IP telephony in your enterprise network. Each office will have a handset and support for an additional network-attached end device. Both devices will be using network resources at the same time. Your company also requires that all end device-facing switch interfaces have 802.1X enabled. The handsets do not support 802.1X.

In this scenario, which statement is correct?

Click the Exhibit button.

You are configuring multicast routing in a Juniper enterprise network using PIM sparse mode (PIM SM). The network includes multiple routers and R1 is designated as the rendezvous point (RP). You want to ensure that multicast traffic from the sources reach receivers across the network.

Referring to the exhibit, which two configuration elements are required on R2 to ensure proper multicast forwarding? (Choose two.)

An IP telephone and a workstation share one access connection. The telephone has learned the voice VLAN. How should their traffic be separated?

Click the Exhibit button.

Referring to the exhibit, which two statements are correct? (Choose two.)

Click the Exhibit button.

You need to configure the non-RP routers in your network to dynamically learn the location of the RP using standard protocols only. You have already applied the configuration shown in the exhibit, but the routers have not learned the location of the RP.

Which additional step must you take to fulfill these requirements?

You are enabling CoS throughout your enterprise network using the DSCP bits. You plan to use an MF classifier on all edge devices while using BA classifiers on all transit core devices.

In this scenario, what should you use to provide consistent handling of traffic?

Click the Exhibit button.

Your network receives the full Internet BGP routing table from two different ISPs. You want your local routers to use Provider A to forward all Internet traffic as long as Provider A is available.

Referring to the exhibit, which two actions would satisfy this requirement? (Choose two.)

You configured MVRP in your Layer 2 network and you are adding two new interfaces to your distribution switch. You are asked to ensure that if a rogue device that uses MVRP is connected to these interfaces, that the MVRP PDUs are ignored.

In this scenario, what should you configure to accomplish this task?

You are asked to establish authentication for users connecting to the corporate network. You must ensure that only corporate devices that are identified by MAC addresses are allowed to authenticate and connect. Authentication must be handled by a centralized database.

Which authentication method would you implement in this scenario?