Free HPE6-A71 Exam Dumps Preview

Refer to the exhibit.

The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit.

What can the administrator determine about the configuration of the AP?

What must the administrator configure on AirWare to monitor and run operational commands on the Aruba Mobility Masters (MMs) and Mobility Controllers (MCs)?

Refer to the exhibit.

An administrator configures a policy for an AP Group. Port 3 of a RAP is a trunk that connects to a switch at a branch office. VLAN 1 is untagged and VLANs 10 (for data) and 11 (for voice) are tagged. The administrator applies an ACL inbound on Port 3 of the RAP.

How does this configuration affect traffic on Port 3?

An administrator sets up a network scan set in AirWave to scan a subnet to identify devices for a firmware upgrade. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access. However, SSH access fails and the administrator must manually configure the SSH credentials used for all of these devices.

What should the administrator have done before running the network scan?

Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?

Refer to the exhibit. An administrator implements an L2 cluster of Aruba Mobility Controllers (MCs) as shown in the exhibit. An external RADUIS AAA server authenticates clients associated with the Active User Anchor Controller (A-UAC), where the NAS IP address sent from Controller B is 10.254.1.2.

By default, what happens to the user's session when it is handed over to the Standby UAC (S-UAC) after a failover?

An administrator needs to modify a VAP used for a branch office RAP. The VAP's operating mode is currently defined as backup and uses tunnel mode forwarding. The administrator wants to implement split-tunnel forwarding mode in the VAP.

Which WLAN operating mode must the administrator define for the VAP before the tunnel forwarding mode can be changed to split-tunnel?

An administrator migrates Aruba Mobility Controllers (MCs) from ArubaOS.6x to ArubaOS.8. x. In the 6.x. configuration, the administrator configures GRE tunnels on the local controllers to a controller in the DMZ to keep guest traffic off the corporate network. The problem with the solution is that is creates suboptimal routing paths.

Which feature should the administrator implement to solve this problem?

Refer to the exhibit.

Two Aruba Mobility Controllers (MC) are managed by a Mobility Master (MM) in a non-cluster deployment as shown in the exhibit.

The C1 controller is connected to AP1 and AP2.
The C2 controller is connected to AP3 and AP4.
VLAN mobility is enabled in the VAPs of both AP Groups.
Both C1 and C2 support the same VLANs.
User1's wireless device supports BSS Fast Transitioning and is currently connected to AP1.

What happens if User1 roams across the network and the user's device associates to AP3?

An administrator has a cluster of Aruba Mobility Controllers (MCs). The administrator wants to manually reboot one of the controllers.

Before rebooting, which command should the administrator use to move the APs?

An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator can an administrator this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command.

Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?

An administrator supports an Aruba wireless network. The administrator configures as AAA profile referenced in a WLAN profile, where:

The initial role assigned in the AAA profile is logon The MAC authentication default role is guest
The 802.1X authentication role is authenticated

ClearPass is used to verify the 802.1X user credentials. A user authenticates and is assigned the authenticated default role instead of the role assigned in the ClearPass server configuration.

What must the administrator do so that the ClearPass role is assigned to the user?

An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.

Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?

Refer to the exhibit.

What can the determined from the command shown in the exhibit?

An administrator configures a network scan set in AirWare to scan a subnet to discover new switches. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access. However, SSH access fails and the administrator must manually configure the SSH credentials used for all of these devices.

To prevent this problem in the future, what should the administrator complete prior to running the network scan?

A company network implements Skype for Business, where voice and video calls, desktop sessions, and file sharing sessions need to be prioritized. These applications are used across a wireless network, implemented with Aruba APs and Aruba Mobility Controllers (MC) that run ArubaOS 8.x.

Which Unified Communications and Collaboration (UCC) deployment mode should an administrator recommend for this customer?

Which VPN component must be configured on the Mobility Master (MM) to allow a RAP to use the built-in certificate to successfully connect to a Mobility Controller (MC)?

An administrator wants to implement AAA in an Aruba wireless environment that references two ClearPass servers for redundancy.
To use these servers, what must the administrator create that will be referenced in the AAA profile?

An administrator implements machine authentication in an 802.1X profile.

Which user role will be assigned to the user's session if machine authentication fails, but the 802.1X user authentication passes for a user who connects?

An administrator wants to use AirWave to manually add devices on the network.

Where should the administrator perform this action?

An administrator manages an Aruba wireless network. Users authenticate to the wireless network using PEAP, where their credentials are validated by the controller's local database. The company purchases Android tablets to use with an inventory tracking system. The administrator notices that many of the users of these devices use their normal username and password to authenticate, which allows the tablet to access all resources that the user can access from their wireless computers. This is a security violation.

Which Aruba Mobility Controller (MC) feature should the administrator configure to restrict tablet access to a web portal for authentication, where an appropriate post-authentication policy can be applied to these tablets?

A customer uses an SIP application that is not supported by Aruba United Communications and Collaboration (UCC).

Which voice deployment mode should the administrator implement on Aruba Mobility Controllers (MCs) to support this application?

An administrator configures a port on a RAP through the association of an AAA profile with 802.1X authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached. The administrator notices that when users connect wirelessly to the RAP, a user role correctly restricts their traffic. But, when users connect with their wired desktops, they are assigned an initial role and routed to a Captive Portal page.

What must the administrator do to enable desktop usage based on the user's role assignment?

An administrator creates new pre-and post-authentication roles for a new WLAN.
For which profile should the administrator assign these new roles under the Managed Network section?

An administrator implements clustering on Aruba Mobility Controllers (MCs) that run ArubaOS 8.x. An AP is connected to a cluster member. The administrator accidentally powers off the AP.

How does the AP determine that it should failover to an alternate controller in the cluster?

An administrator manages an Aruba wireless solution, deployed in a company with locations across the world. In one country, the local government organization that controls wireless transmissions increases the maximum EIRP allowed for certain channels.

Which component does the administrator need to update on the Mobility Master (MM) to accommodate this change?