Free HPE0-V14 Exam Dumps Preview

A customer has an application that consumes 500 GB storage and requires an RTO and PRO of 15 minutes.

Which backup and recovery technology enables the customer to meet their requirements in the most cost-effective manner?

A customer needs a low cost block storage array for targeted workloads. The array needs to provide automated tiering, thin provisioning, and snapshot capabilities.

Which HPE storage solution meets the customer requirements?

A customer recently installed a VMware environment with HPE ProLiants, HPE MSA storage, and Aruba switches.

What should you recommend to the customer to manage their support contracts with HPE?

You are troubleshooting a customer's HPE ProLiant rack-mount server. The customer has configured the server in Legacy Boot BIOS Mode and is trying to boot from a USB 3.0 drive. The server will not boot from the drive.

What should you do?

Refer to the exhibit.

You are configuring a pair of HPE 5945 switches into an IRF stack You have cabled the switches as depicted in the exhibit Into which IRF Ports should you place each switch interface?

A customer has the following requirements:

1. two or more 10Gb SFP+ uplinks
2. downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables.
3. 24 downlink ports

Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?

You are working on a server, and you notice that the blue UID light on the server is flashing slowly.

What does this indicate?

What has HPE implemented in the HPE ProLiant Gen10 to prevent malware?

A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The customer runs a large Oracle database. They need to increase performance and reduce their licensing costs.

Which feature of HPE Gen10 servers offers these benefits?

Which series of internal checks will an HPE ProLiant server use to validate that the base hardware components are working correctly before booting the operating system?

A customer needs to virtualize their storage across physical servers and storage environments.

Which HPE solution meets the customer's needs?

A customer needs to move from their traditional tape-based backup infrastructure to a standalone application to disk based backup solution using HPE StoreOnce. The environment does not use a hypervisor.

The customer has the following goals for their long-term backup retention:

1. retain data for over two years at low cost
2. data is archival and rarely accessed, if ever

Which HPE StoreOnce components can help meet the customer goals in the most cost effective manner? (Choose three.)

A customer has a HPE OneView environment and has added all their HPE ProLiant servers and enclosures.

Which benefits does a customer gain by configuring Remote Support on their environment? (Choose two.)

You are installing an HPE StoreOnce backup system in a customer's environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database). They also need the ability to integrate with an existing third-party backup software.

How must you configure the StoreOnce system to meet the customer's requirements?

Refer to the exhibits.

A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array.
You created the original configuration.

How many drives can be added to the customer array? (Select two)

Which HPE service level offers customers special parts handling and access to onsite service 24x7, including HPE holidays?

You are designing a solution to run a Citrix XenDesktop workload.

Which HPE planning and designing resource contains a detailed example of this type of solution, including a list of all the hardware and software components?

DRAG DROP

A customer considers a new HPE ProLiant DL380 Gen10 as a hardware platform for their application and
requires maximum physical security.
For each security-related server components, identify whether it needs to be ordered separately, or whether it is included as part of the server solution.

An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.

Which HPE software tool should the customer use to minimize the time required to perform this activity.

A customer is standardized on high-density, rack-mounted servers. They have an application that requires 3 six-drive RAID6 groups and redundant 10 Gb NICs.

What is the highest-density server that meets these customer requirements?

A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.

How should the customer configure their network?

A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.

Switch A has the lower LACP System Priority.

Which LACP operation states describe the failure above?

A customer needs a shared storage solution for a virtualization platform that will host a database application. The customer is considering an HPE Nimble array.

Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

DRAG DROP

Drag the correct protocols from the left to their appropriate area on the topology.

A customer needs to integrate a new digital video surveillance solution into their existing environment and available network ports. The solution needs to include redundant hypervisor servers and a redundant SAN with a shared Fibre Channel attached storage array.

You plan to propose the following configuration:

2 HPE DL380 Gen10 servers with dual processors, 384 GB of memory, dual port 10 Gb NIC, and High Performance Fan Kit 1 HPE MSA 2050 Dual Controller Storage Array with 24x 1.8 TB 10 K SAS drives and 96x 7.2K NL drives
4 VMware vSphere Standard licenses
1 VMware vCenter Server Foundation licenses
5 year 24x7x4 support for all equipment

What must be added to the configuration to provide a complete solution? (Choose two.)

A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.

Which management solution provides this functionality?

A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED.

The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select
two.)

A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality.

Which HPE product family will meet this customer's needs?

A customer is planning an upgrade in their data center. The customer needs to deploy on bare-metal and virtual servers easily through a common interface. In addition, they have expressed an interest in software-defined storage.

\ Which HPE compute platform should you suggest?

Refer to the exhibit.

You are asked to review a server configuration for a customer before it is quoted. The server will be used in a business-critical environment and high availability is required. The server configuration is shown in the exhibit.

What should be added to the configuration to ensure availability?

What can you do when installing an HPE switch to provide protection from electrostatic discharge?

You are installing multiple components into an existing server.

Which HPE resource can you use to verify the compatibility of the server hardware options with the server? (Select two.)

DRAG DROP

Match the customer requirement to the appropriate HPE storage solution.

What is the correct cable type to use when connecting a pair of switches using Long Range (LR) Transceivers?

DRAG DROP

Place the components on the left in the correct order on the right for the recommended power-up sequence.

An administrator deployed a new FlexFabric switch Into the environment and wants to collect baseline information from the switch The administrator wants to be able to use this in case there is any question from support should the administrator open a case.

Which command can the administrator use to collect support information from the switch?

You are installing a server solution in a customer's data center.

How can you ensure that the installation complies with relevant electrical best practices? (Choose two.)

DRAG DROP

Match the Networking Product Family to the appropriate use case:

A customer purchased a Nimble HF20 a year ago They are experiencing an issue with a few of their VMware servers in the RTP Nimble date center and asked that you make a recommendation based on the data in infoSight.

What should you recommend'?

DRAG DROP

Match each characteristic to the correct storage type.

A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:

1. Multi-protocol connectivity
2. Flash-accelerated storage
3. Low-cost midline SAS drives

Which HPE storage platform will meet these requirements?

You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support has directed you to test a minimum hardware configuration.

Which components should you remove? (Choose two.)

What does the term composable mean when applied to HPE infrastructure?

Which HPE tool can securely erase current content of a server and help with consistent and easy operating system installation?

You are installing an HPE Nimble HF20 into a customer's existing rack.

Prior to installation, what should you consider?

A customer wants to safeguard their server firmware and asks you about the HPE ProLiant Gen10 features that provide this level of security.

Which Gen10 feature best addresses the customer's concern?