VCEdump

HP2-Z34 Building HP FlexFabric Data Centers

PDF question preview Back to product

Reading controls

Reader tools

Free demo

9 of 60 questions

Purchase the full version to unlock every question and answer.

View the full question set

Preview tools

Try Web TestEngine

Question formats

Single choice9

HP · HP2-Z34

Free HP2-Z34 Exam Dumps Preview

Preview real exam questions, verified answers and available explanations before choosing a study plan.

Question 1

Single choice

An HP Comware switch supports FCoE in Fibre Channel Forwarder (FCF) mode. A switch interface Ten1/0/1 connects to a server FCoE Converged Network Adapter (CNA). The CNA will carry normal data
2. which is associated with VLAN
20.

How does the administrator assign FCoE traffic for this CNA to VSAN 2?

A
by accessing the VSAN 2 configuration view and specifying Ten1/0/1 as a member port of the VSAN
B
by accessing the VLAN 20 configuration view and specifying Ten1/0/1 as a member port of the VLAN
C
by setting Ten1/0/1 to FCoE mode and specifying VSAN 2 as the port access VSAN
D
by binding a VFC interface to Ten 1/0/1 and specifying VSAN 2 as the VFC interface trunk VSAN

Reveal answer details Close answer details

Correct answerA

Question 2

Single choice

What is the correct use case for implementing priority flow control (PFC) on a switch port?

A
The port carries data and storage traffic. PFC should be applied to the priority queue that is assigned to storage traffic.
B
The port carries multimedia voice and video traffic PFC should be applied to the queues with a lower priority than multimedia traffic
C
The port carries data and storage traffic PFC should be applied to the queues with a lower priority than storage traffic.
D
The port carries multimedia voice and video traffic PFC should be applied to the priority queue that is assigned to multimedia traffic.

Reveal answer details Close answer details

Correct answerC

Question 3

Single choice

Refer to the exhibit

An administrator is setting up this data center topology to use SPBM VMs in the same subnet should be able to communicate at Layer 2 and be isolated at Layer 2 from other subnets.
On which Switch 1 interfaces should the administrator enable SPBM?

A
interfaces Ten1/0/1-Ten1/0/48 and interfaces Forty1/0749-1/0750
B
interfaces Forty 1/0749-1/075 only
C
VLAN interfaces 101 and 103
D
VLAN interfaces 10, 20, and 30

Reveal answer details Close answer details

Correct answerC

Question 4

Single choice

To provide redundancy, a company has multiple data centers that use server virtualization.

What is a networking requirement for this scenario?

A
less bandwidth at the server access layer and more bandwidth at the distribution layer than in a non-virtualized network
B
physical network segmentation and isolation implemented at Layers 1 through 7
C
localized storage volumes that are isolated within each data center
D
extension of Layer 2 connectivity across the data centers

Reveal answer details Close answer details

Correct answerD

Question 5

Single choice

Refer to the exhibit

A company added a second data center IRF 1 and IRF 2 connect on direct Ethernet cables.

What is the simplest, most flexible and resilient option for the data center connection?

A
link aggregation between IRF 1 and IRF 2
B
VPLS solution between IRF 1 and IRF 2
C
EVI network between IRF 1 and IRF 2
D
IRF 1 and IRF 2 combined into a single IRF virtual device

Reveal answer details Close answer details

Correct answerB

Question 6

Single choice

Which option is correct about the flash memory of an HP Comware switch with multiple MDCs?

A
Each MDC has its own subfolder in the flash, but it can also access another MDC's subfolder if administrators specifically reference the appropriate folder ID.
B
The entire flash directory is shared by every MDC. All MDCs have root access.
Administrators may create new subfolders.
C
Each MDC including the Admin MDC can only access its own subfolder in the flash The Admin MDC can also access the root folder, but not the subfolder for other MDCs.
D
Except for the Admin MDC each MDC can only see and access its own subfolder in the flash.
The Admin MDC has root access to the root folder and all subfolders.

Reveal answer details Close answer details

Correct answerB

Question 7

Single choice

An HP Comware Switch 1 supports FCoE for connected servers with Converged Network Adapters (CNAs). On interface Ten 1/0/1 Switch 1 sends FCoE traffic in VSAN 2 to an upstream switch.

Switch 2 which also supports FCoE What is the correct configuration for interface Ten 1/071?

A
FC trunk port, which permits VSAN 2
B
bound to a VFC interface, which is a trunk port and permits VSAN 2
C
bound to a VFC interface, which is an access port in VSAN 2
D
FC access port in VSAN 2

Reveal answer details Close answer details

Correct answerC

Question 8

Single choice

An administrator creates two VPN instances on an HP Comware switch, in addition to the public instance.
The switch implements routing protocols and MPLS.

Which statement is correct about the routing tables and Label Forwarding Information Bases (LFIBs) maintained by the switch?

A
The switch uses a single routing table and maintains a separate LFIB for each VPN instance
B
The switch maintains a separate routing table and LFIB for each VPN instance, but the public tables automatically include entries from the other instances.
C
The switch maintains a separate routing table and LFIB for each VPN instance.
D
The switch maintains a separate routing table for each VPN instance and uses a single LFIB

Reveal answer details Close answer details

Correct answerD

Question 9

Single choice

An administrator configures two VSANs on an HP Comware IRF virtual switch. The IRF members connect to a server with two Converged Network Adapters (CNAs) One CNA is connected to VSAN 1. and the

other is connected to VSAN 2 The storage target for the server is also connected to VSAN 1 and VSAN 2.

What is required for this setup to work?

A
The HP switch must place the ports connected to the server CNAs in a link aggregation set to static mode
B
The server CNAs must support multi-path I/O (MPIO)
C
The HP switch must place the ports connected to the server CNAs in a link aggregation set to dynamic (LACP) mode
D
The HP switch must support multi-path I/O (MPIO).

Reveal answer details Close answer details

Correct answerA

Free HP2-Z34 Exam Dumps Preview

Building HP FlexFabric Data Centers

PREVIEW CONTENTS · 1 VOLUME

QUESTION 1

QUESTION 2

QUESTION 3

QUESTION 4

QUESTION 5

QUESTION 6

QUESTION 7

QUESTION 8

QUESTION 9