Free HP0-Y52 Exam Dumps Preview

Refer to the Exhibit.

Exhibit: HP Comware switch configuration.

[Comware] vlan 100

[Comware-vlan100] quit

[Comware] vlan 200

[Comware-vlan200] quit

[Comware] interface g1/0/22

[Comware-GigabitEthernet1/0/22] port link-type trunk

[Comware-GigabitEthernet1/0/22] port trunk permit vlan 100 200

[Comware-GigabitEthernet1/0/22] quit

A network administrator configures the Comware switch, as shown in the exhibit. The network administrator then connects a cable from the Comware's g1/0/22 interface to port 5 on an HP ProVision switch.

Which configuration will successfully establish connection for VLAN 1, 100, and 200 between the two switches?

HOTSPOT

Match the description with the 802.11 standard. (Each option may be used only once.)

A network administrator is configuring a static route.

What should the administrator use as the next hop address?

Which HP solution delivers automated virtual machine orchestrator, automatic synchronization of network connectivity information, and visibility to performance of wired and wireless users?

Refer to the exhibit.

All four switches run MSTP. Switch_A, Switch_B, and Switch_C are configured with this MSTP information:

- Config name = "Region 1"

- Revision number= 1

- Instance 1 = VLANs 10, 12

- Instance 2 = VLANs 11, 13

- IST instance = VLANs 1-9, 14-4094

Switch_D is configured with this MSTP information:

- Config name = "Region1"

- Revision number= 1

- Instance 1 = VLANs 10, 12

- Instance 2 = VLANs 11, 13, 14, 15
- IST instance = VLANs 1-9, 16-4094

Based on this information, what is the result of this MSTP configuration?

A network administrator deletes old files in the flash file system of an HP Comware switch. The administrator then notices that the amount of free space available has not changed.

Which command must the administrator execute to free up the space from deleted files?

A customer has an HP ProVision switch capable of Layer 3 forwarding: however, Layer 3 forwarding is disabled.
The switch has an IP address in the management VLAN, where the default gateway is 10.1.1.1, which ProVision command should the network administrator use so the ProVision switch can access the Intelligent Management Center (IMC) server in a different VLAN?

Refer to the exhibit.

The network administrator is setting up Multiple Spanning Tree Protocol (MSTP) with the settings shown in the exhibit. All the switches are in the same region. The administrator has requested help determining which VLANs each switch-to-switch link should carry.

What is a recommendation for this topology?

Refer to the Exhibit.

Examine the output from the Comware command shown in the exhibit.
Based on the flag of ACDEF, what is the status of the aggregated link?

Which statement is true about the default configuration on an HP ProVision switch?

A network administrator configures this command on an HP ProVision switch:

vlan 30 ip helper-address 10.0.3.253

The switch is able to ping 10.0.3.253. After the administrator configures the command, users in VLAN 30 report that their PCs fall to acquire addresses using DHCP.

What should the administrator ensure?

A company wants a modular switch for the access layer at its main campus and for several branch offices.

Which HP Switch Series is best suited for this role?

Where is priority information stored in an Ethernet frame?

Refer to the exhibit.

The switches in the exhibit are all HP ProVision switches that run Multiple Spanning Tree Protocol (MSTP).

The network administrator wants all of the switch-to-switch links shown in the exhibit to be available for forwarding routed traffic.

What should the administrator do to accomplish this?

A company wants to implement HP Intelligent Resilient Framework (IRF) at the access layer.

Which switches could they use?

A customer wants to implement multiple links between a server and a single HP Comware switch in order to increase the amount of bandwidth for more throughput.

Which feature should the network administrator implement to accomplish this?

Refer to the exhibit.

A network administrator has implemented link aggregation on an HP Comware switch using LACP. The two ports are functioning at the data link layer between the Comware switch and its neighboring switch.
The administrator executes the display link-aggregation verbose command and notices the flags shown in the exhibit.

What does this indicate?

Refer to the exhibit.

What does the output indicate about GE1/0/1?