VCEdump

HP0-S32 HP BladeSystem Networking 2011

PDF question preview Back to product

Reading controls

Reader tools

Free demo

21 of 136 questions

Purchase the full version to unlock every question and answer.

View the full question set

Preview tools

Try Web TestEngine

Question formats

Single choice15

Multiple choice6

HP · HP0-S32

Free HP0-S32 Exam Dumps Preview

Preview real exam questions, verified answers and available explanations before choosing a study plan.

Question 1

Single choice

Which management interface provides the administrator with the most control over switch parameters and monitoring functions?

A
SNMP
B
Web browser
C
Menu
D
CLI

Reveal answer details Close answer details

Correct answerD

Question 2

Single choice

What is the advantage of using Virtual Connect Flex-10 technology in a VMware environment?

A
It becomes tightly linked with VMware for better management through vCenter.
B
It eliminates the limit on NIC connections imposed by default on each VMware server.
C
It enables full VLAN support in VMware including multiple tagging functionality.
D
It allows bandwidth to be allocated as necessary to each VMware service or application.

Reveal answer details Close answer details

Correct answerD

Question 3

Multiple choice

What are valid reasons for creating trunk links between switches? (Select three.)

A
Standby link capabilities are available with dynamic trunks.
B
A greater number of VLANs can be supported.
C
Capacity is maximized by increasing the number of links available for data flow.
D
Guaranteed load balancing prevents unbalanced traffic load across links.
E
There is improved availability because of the lower risk of link failure.
F
The overall error count on the switch is decreased.

Reveal answer details Close answer details

Correct answersA, C, E

Question 4

Single choice

What is a benefit of dynamic link aggregation?

A
Port VLAN membership is transferred to a dynamic trunk.
B
Dynamic links support HP port trunking.
C
Dynamic standby links are supported.
D
Dynamic links appear in the switch configuration file.

Reveal answer details Close answer details

Correct answerC

Question 5

Single choice

A server profile has been defined where the total custom and preferred bandwidth values specified for the server's FlexNICs exceed 10Gb.

How does Virtual Connect Manager handle this situation?

A
It allocates the requested bandwidth to each FlexNIC, starting with the lowest numbered port until the entire 10Gb has been assigned. The remaining ports are disabled.
B
It calculates the proportion of the total each FlexNIC has been allocated and assigns each an equal proportion of the available 10Gb.
C
It forces the bandwidth values to be re-entered until the total requested does not exceed the 10Gb available.
D
It returns an error and requires the deletion and re-creation of the server profiles that have been defined across all the enclosures in the domain.

Reveal answer details Close answer details

Correct answerB

Question 6

Single choice

Which device is a Converged Network Adapter (CNA)?

A
HP NC553i Dual Port FlexFabric 10Gb Adapter
B
HP 4X QDR IB CX-2 Dual-port Mezzanine HCA
C
HP NC522m Dual Port Flex 10 10Gb Adapter
D
HP NC522SFP Dual Port 10GbE Server Adapter

Reveal answer details Close answer details

Correct answerA

Question 7

Multiple choice

Which steps are involved in traffic prioritization? (Select three.)

A
scheduling
B
sorting
C
classifying
D
marking
E
limiting
F
discarding

Reveal answer details Close answer details

Correct answersA, C, D

Question 8

Single choice

What best describes the functionality of the Virtual Connect Ethernet module?

A
Layer 2 switch
B
Layer 3 switch
C
pass-thru module
D
Ethernet port aggregator

Reveal answer details Close answer details

Correct answerD

Question 9

Single choice

How many BladeSystem c7000 enclosures are supported in a single Virtual Connect domain?

A
1
B
4
C
8
D
16

Reveal answer details Close answer details

Correct answerB

Question 10

Multiple choice

What are the requirements for link aggregation using LACP? (Select three.)

A
Links must have the same tagged VLANs assigned.
B
Links must be the same speed.
C
Links must use the same media type.
D
Links must share a boundary.
E
Links must be full-duplex.
F
Links must be fiber connections.

Reveal answer details Close answer details

Correct answersB, D, E

Question 11

Multiple choice

Which protocols are industry-standard switch protocols? (Select two.)

A
LLDP
B
CDP
C
LLTD
D
STP
E
EGRP

Reveal answer details Close answer details

Correct answersA, D

Question 12

Single choice

Which action is required at the guest operating system level to enable it to run on a virtual machine?

A
A key code must be loaded into the registry and validated by VMware.
B
The VMware driver must be loaded for full network support.
C
No action is required because VMware is transparent to the operating system.
D
A VMware license must be loaded on each guest.

Reveal answer details Close answer details

Correct answerC

Question 13

Single choice

The FC Mode indicator on uplink X2 on a Virtual Connect FlexFabric 10Gb/24-port module is illuminated solid and not flashing.

What does this signify?

A
There is a logon error in the upstream Fibre Channel switch.
B
Uplink X2 is not passing Ethernet traffic.
C
The SFP device in uplink port X2 has an invalid signature.
D
There is a Flex-NIC configuration error on one of the installed server blades.

Reveal answer details Close answer details

Correct answerB

Question 14

Single choice

What does Virtual Connect require to support LACP on upstream switches?

A
Link Aggregation Group (LAG) IDs must be greater than 22.
B
The Virtual Connect Uplink parameter must be set to Auto.
C
The trunk must be configured as a static partner.
D
The Virtual Connect Uplink parameter must be set to Failover.

Reveal answer details Close answer details

Correct answerB

Question 15

Multiple choice

What are advantages of using Layer 3 to connect from the access layer to the core? (Select three.)

A
flatter network with fewer hops
B
equal cost balancing on all links with OSPF
C
extended broadcast domains
D
loop control using spanning tree
E
VRRP configuration not required
F
no link blocking involved

Reveal answer details Close answer details

Correct answersB, E, F

Question 16

Single choice

The IEEE 802.1AX (802.3ad) Link Aggregation Control Protocol is a Layer 2 protocol.

What is its function?

A
dynamically identifies link speeds regardless of media type
B
forms port trunks consisting of two or more uplink ports
C
identifies the VLAN to which frames transmitted on a link or port trunk belong
D
advertises information that describes and identifies devices

Reveal answer details Close answer details

Correct answerB

Question 17

Single choice

Which type of domain describes a VLAN?

A
broadcast
B
collision
C
virtual
D
dynamic

Reveal answer details Close answer details

Correct answerA

Question 18

Single choice

When a Flex-10 server adapter is deployed in a Virtual Connect Flex-10 environment, how are the FlexNICs recognized by the operating system?

A
as individual 10GbE NICs, until the correct driver is loaded by the operating system at boot time
B
as individual NICs, after the correct license key has been loaded and verified by the Onboard Administrator
C
as individual 1GbE NICs, until the correct driver is loaded by the operating system at boot time
D
transparently, because the server ROM recognizes each FlexNIC as an individual NIC with its own driver

Reveal answer details Close answer details

Correct answerD

Question 19

Single choice

What does trunk refer to in industry-standard terminology?

A
aggregated switch links
B
tagged VLAN port (802.1Q)
C
tagged VLAN port plus link aggregation
D
Shared Uplink Set plus Connection Mode Auto

Reveal answer details Close answer details

Correct answerA

Question 20

Multiple choice

Which tasks are used to define a vNet for Virtual Connect Ethernet? (Select three.)

A
Assign only one network per server NIC.
B
Assign one or multiple networks per server NIC.
C
Optionally set the native VLAN.
D
Define the server profile.
E
Specify VLAN names/IDs.
F
Select unassigned uplinks.

Reveal answer details Close answer details

Correct answersA, D, F

Question 21

Single choice

Which advantage does Flex-10 technology provide?

A
increased Layer 2 switch port count
B
increased CPU performance
C
decreased number of interconnect modules
D
increased dynamic management functionality

Reveal answer details Close answer details

Correct answerC

Free HP0-S32 Exam Dumps Preview

HP BladeSystem Networking 2011

PREVIEW CONTENTS · 2 VOLUMES

QUESTION 1

QUESTION 2

QUESTION 3

QUESTION 4

QUESTION 5

QUESTION 6

QUESTION 7

QUESTION 8

QUESTION 9

QUESTION 10

QUESTION 11

QUESTION 12

QUESTION 13

QUESTION 14

QUESTION 15

QUESTION 16

QUESTION 17

QUESTION 18

QUESTION 19

QUESTION 20

QUESTION 21

VOL	TYPE	QUESTIONS
1	Single choice	15
2	Multiple choice	6