Free H13-341 Exam Dumps Preview

If OCh trails fail to be created by trail, which are possible causes?

What are the wavelengths of the OSC channel used by the ST2 board?

In the scenario where the non-convergence OTU processes OTN standard signals, both A and B are WDM sites. After receiving the OTUk_TIM alarm on the client side, the OTU board at station A sends the OTUk_BDI alarm to the upstream. When the TIM follow-up action is disabled, the alarm is no longer transmitted to the downstream. When the TIM follow-up action is enabled, an SF event is generated. The WDM side of the OTU board at station B reports the ODUk_PM_AIS alarm, and the ODUk_PM_AIS alarm is transmitted to the downstream. The client equipment reports this alarm. After the WDM side of the OTU board at station B receives the OTUk_TIM alarm and the TIM follow-up action is disabled, the alarm is no longer transmitted to the downstream. When the TIM follow-up action is enabled, an SF event is generated. After the client side of station B processes the SF event, the client equipment reports the ODUk_PM_AIS alarm.

Which of the following functions is added to EX40 compared with X40?

Which of the following statements about MPLS is wrong?

Dispersion compensation is not required for 40Gbit/s and 100 Gbit/s coherent systems because the dispersion tolerance of coherent boards is large. NG WDM products do not support hybrid transmission of non-coherent and coherent networks.

The OD system monitors the main optical path performance in each optical multiplexing section (OMS), which of the following items are monitored?

When the standard Ethernet frame whose length is 64 Bytes is accessed to the Ethernet board, if the QinQ function is enabled, what is the actual frame length if the signal in the board? ()

Which of the following statements about the electrical-layer overhead processing source function are correct?