Your manager has attended an industry event and calls a meeting to discuss some ideas upon his return. One concept that caught his attention was the use of virtual fabrics. What are two (2) advantages of implementing virtual fabric technology? (Choose two.)
A. ease of design
B. isolation of Fault Domains
C. independent SAN fabric management
D. universally adopted technology
E. separate fabric services
CIFS is a stateful service. What maintains a history of connection activities?
A. server only
B. application
C. client and server
D. domain controller
A storage configuration was created which stores large amounts of infrequently used documents. The storage implementation is based on serial attached SCSI (SAS) and an edge expander. Almost all ports are utilized, and a second edge expander will be installed. What is required to connect SATA devices to the SAS domain?
A. SASSATA adapter
B. SASSATA protocol converter
C. cable with two SATA connectors
D. cable with a SAS and a SATA connector
When replacing an HBA, which two steps should be performed prior to connecting the HBA to the fabric? (Choose two.)
A. activate the zone set
B. disable zoning for the old HBA
C. update the alias map with the new WWN
D. create a new zone for the old HBA to ensure isolation of the defective component
E. rename the active zone(s) to match the new HBA's WWN
What must you do to implement boot from a Fibre Channel SAN in your server infrastructure?
A. Configure the SAN Boot setting on the Fibre Channel HBA.
B. Enable direct disk access on the SAN switch.
C. Enable the BIOS on the Fibre Channel HBA.
D. Perform a loopback data test on the Fibre Channel HBA.
A customer's switch command line indicates that the status of port 4 is isolated. You know that port 4 is connected to a target device. What is the problem?
A. port speed inconsistency
B. Domain ID inconsistency
C. E_D_TOV mismatch
D. Fibre type mismatch
What metric is used when determining how many storage subsystem ports can be attached to a single host port?
A. fanin
B. buffer credits
C. fanout
D. ISL oversubcription
Identify the zoning object that is hardware enforced.
A. alias
B. E_Port
C. zone set
D. F_Port
Users are complaining the response times are out of range on a retail application. Performance monitoring of the storage subsystem indicates that there are no problems. A check of the host error logs shows that there are excessive SCSI retransmit errors. The 2Gb/s HBA on the host was recently replaced with a 4Gb/ s HBA. What is the most probable cause of the timeout errors?
A. the link is utilizing 9 micron fiber
B. SCSI timeout value is set too small
C. the switch port to the storage subsystem is set at 2Gb/s
D. the distance from the host to the storage subsystem is greater than 175 meters
What two (2) technologies are commonly used in a business continuity plan? (Choose two.)
A. tape backup with restore to a remote site
B. subsytembased synchronous replication to a remote site
C. subsystembased asynchronous replication to a remote site
D. subsystembased replication in the same datacenter
E. virtual tape library with restore to a remote site
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only SNIA exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your S10-201 exam preparations and SNIA certification application, do not hesitate to visit our Vcedump.com to find your solutions here.