Exam Details

  • Exam Code
    :RCDD
  • Exam Name
    :BICSI Registered Communications Distribution Designer – RCDDv14
  • Certification
    :BICSI Certification
  • Vendor
    :BICSI
  • Total Questions
    :427 Q&As
  • Last Updated
    :Apr 23, 2024

BICSI BICSI Certification RCDD Questions & Answers

  • Question 1:

    Power outlets should be place every 10 feet around the perimeter walls of the TR.

    A. True

    B. False

  • Question 2:

    For design purposes, which of the following would be the typical size range of a 4-pair 100 ohm UTP or ScTP (FTP) cable?

    A. .50 in to .75 in

    B. .14 in to .25 in

    C. .31 in to .43 in

    D. .11 in to .18 in

  • Question 3:

    For a building with up to 100,000 sq. ft. of usable floor space, what would be the minimum size of the back board, in an entrance facility, to accommodate up to 1200 copper pairs, protected and terminated in a manner suitable for cross-connection requirements?

    A. One 4 ft X 8 ft. X 3/4 inch plywood.

    B. One 2 ft X 4 ft. X 3/4 inch plywood.

    C. Two 4 ft X 8 ft. X 3/4 inch plywood.

    D. One 4 ft X 4 ft. X 3/4 inch plywood.

  • Question 4:

    Which of the following should be used as a guideline for estimating space requirements of optical fiber and coaxial cable cross-connections in a TR?

    A. 3 sq. in. for each fiber pair to be patched or cross-connected.

    B. 2 sq. in. for each fiber pair to be patched or cross-connected.

    C. 4 sq. in. for each fiber pair to be patched or cross-connected.

    D. 1 sq. in. for each fiber pair to be patched or cross-connected.

  • Question 5:

    In a computer or control room where the plenum is used for heating, ventilating, and air-conditioning, the finished floor height should be a minimum of how many inches?

    A. 8 inches.

    B. 12 inches.

    C. 2 inches.

    D. 6 inches.

  • Question 6:

    If there are existing copper aerial cables on a pole line, sag the optical fiber cable to the same sag as the other cables.

    A. False

    B. True

  • Question 7:

    Dimmer switches are acceptable for use in a TR.

    A. True

    B. False

  • Question 8:

    Power outlets should be place every 10 feet around the perimeter walls of the TR.

    A. True

    B. False

  • Question 9:

    An ER cannot be used as an entrance facility.

    A. True

    B. False

  • Question 10:

    A vertical conduit mast should not extend above a roof line more than which of the following?

    A. 6 inches

    B. 4 inches

    C. 24 inches

    D. 12 inches

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only BICSI exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your RCDD exam preparations and BICSI certification application, do not hesitate to visit our Vcedump.com to find your solutions here.