You are creating a DIP pool of 30 addresses. You would like to see how addresses are being allocated to different traffice streams. Which command will you use to view this information?
A. snoop
B. get dip all
C. get session
D. get address xlate
When using NSRP, which command will insure uninterrupted communications for VPNs using certificates for authentication?
A. set hostname
B. set NSRP clustername
C. set NSRP cluster name
D. set NSRP cluster hostname
You have configured NSRP so that session state messages are sent to the backup device. A session is about to timeout on the backup device. Which statement most correctly describes what happens next?
A. The backup device sends a session sync query message to the primary.
B. The master device sends a session disconnect message to the backup device.
C. The session times out with no action from either the backup device or the primary device.
D. The primary sends a reset timer message to the backup with a time value of 8 times the protocol timeout value.
You have configured a secondary path for the NSRP cluster. Which type of traffic is sent over the secondary path?
A. NSRP heartbeats
B. RTO message sync
C. NSRP data packet forwarding
D. configuration sync messages
You have entered the command
set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A. If the packet has a scr-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be captured
B. If the packet has a scr-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be captured
C. If the packet has a scr-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will be captured
D. If the packet has a scr-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will be captured
A monitored interface on a clustered pair of ScreenOS devices goes down and both devices became ineligible to be master of the cluster. As a result, neither device is passing traffic. Which step would have prevented this situation?
A. Configure initial hold-down time to 10 seconds.
B. Configure the preempt parameter and a higher priority on one of the devices.
C. Configure the lost heartbeat interval to 1 second.
D. Configure the master-always-exists parameter.
You have been making changes on an NSRP cluster and find that the ScreenOS devices are out of sync. You want to synchronize the devices' configurations together. Which command and process are needed to accomplish this task?
A. Run the command set nsrp sync global-config check-sum on the local device and then reset the peer device.
B. Run the command set nsrp sync global-config save on the backup device and then reset the backup device.
C. Run the command exec nsrp sync config save on the peer device and then reset the peer device.
D. Run the command exec nsrp sync global-config save on the backup device and then reset the backup device.
What are three valid states for an NSRP member? (Choose three.)
A. backup
B. feasible successor
C. ineligible
D. master
E. standby
While troubleshooting performance issues on your NetScreen cluster, you decide to failover the master device to its redundant peer. Which two methods will accomplish this task? (Choose two.)
A. Manually disable an NSRP-monitored interface using the set interface
B. Manually disable an NSRP-monitored interface using the shutdown interface
C. Force an NSRP failover using the exec nsrp vsd-group
D. Force an NSRP failover using the exec nsrp vsd-group
Which two configuration elements are synchronized between the members of an NSRP cluster? (Choose two.)
A. interface IP addresses
B. hostname
C. track IP configuration
D. static routes
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Juniper exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your JN0-533 exam preparations and Juniper certification application, do not hesitate to visit our Vcedump.com to find your solutions here.