Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Log messages are appearing very quickly on the console of your ERX Edge Router. Which privileged Execcommand disables real time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
There are three routers on a Gigabit Ethernet LAN: Router A, Router B, and Router C,Router A is the Designated intermediate System (DIS) at Level 1 for that LAN. Router A's DIS priority is 64. The LAN is a Level 1only link. Router D has just been powered up on that same LAN and its DIS priority is 80.
Which statement is true?
A. Router A remains the DIS and generates a new pseudonode LSP for that LAN.
B. Router A remains the DIS and NO new pseudonode LSP is generated for that LAN.
C. Router D becomes the new DIS, generates a new pseudonode LSP for that LAN, And purges the oldpseudnode LSP generated by Router A.
D. Router D becomes the new DIS, does NOT generate a new pseudnode LSP for That LAN, and doesNOT purge the old psednode LSP generated by Router A.
What are three purposes of a PSNP?
A. to tear down an adjacency
B. to ensure a neighbor is still in the Up state
C. to maintain the link state database sync.
D. To request a copy of a missing LSP on a broadcast network
E. To acknowledge LSPs from a neighbor on a point to point network
Where is the ISIS Network Entity Title configured?
A. per IP interface
B. per virtual router
C. only on LAN interfaces
D. only on WAN interfaces
Which CLI command display the metric associated with each advertised route?
A. show clns database
B. show isis database detail
C. show clns database detail
D. show isis database extensive
Which configuration command configures ISIS to support MPLS Traffic Engineering?
A. metric style wide
B. redistribute mpls
C. metric style narrow
D. dynamic redistribute
An intermediate System experiencing memory problems indicates that it may have incomplete data by setting which bit in its LSP?
A. more bit
B. partition bit
C. attached bit
D. overload bit
Router A and B are connected with a point to point OC3 interface. Each router's OC3interface is configured for both Level 1 and Level 2. The routers are configured the same are a.How many ISIS adjacencies exist between the two routers?
A. 0
B. 1
C. 2
D. 3
You have a Level 1only router (Router A) in ISIS area 49.0001. How does Router Alearn how to reach prefixes in other areas?
A. Router A must have a Level 2 adjancy with the Level 1/Level 2 router in area49.0001.
B. The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 2 LSPit floods into area49.0001.
C. The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 1 linkstate PDU (LSP) itfloods into area 49.0001.
D. The Level 1/Level 2 router in area 49.0001ADVERTISES THESE PREFIXES INTOAREA 49.0001USING A level 2 LSP it floods into area.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Juniper exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your JN0-321 exam preparations and Juniper certification application, do not hesitate to visit our Vcedump.com to find your solutions here.