Select one of the known limitations of DVMRP?
A. DVMRP is not designed as an IP Multicast routing protocol.
B. DVMRP needs another Unicast routing protocol like RIP or OSPF
C. DVMRP is not scable (Max 32 Hops).
D. DVMRP does not support Poison Reverse.
The IS-IS Routing Protocol has been developed in ISO to provide routing for pure OSI environments.
A. True
B. False
The CLI Command configure ospf delete vlan all? Will do the following on an Extreme switch.
A. delete all the vlans from Area 0
B. delet all OSPF areas configured on the switch
C. disable OSPF globally on the switch
D. disable the OSPF routing protocol on all the VLANs
The default OSPF router dead interval for Extreme Networks switches is
A. 10 seconds
B. 40 seconds
C. 120 seconds
D. 180 seconds
What is the CLI command to put vlan purple?on physical port 2 into STPD oak?in EMISTP mode?
A. config stpd oak add port 2 vlan purple emistp
B. config stpd oak add vlan purple port 2 emistp
C. config port 2 vlan purple add oak emistp
D. config vlan purple add stpd oak port 2 emistp
Which of the following ways can result in the election of a new ESRP Master in an Extreme ESRP network when the switches are configured with the default election algorithm?
A. Loss of communication between ESRP master and ESRP Slave/s
B. Adding ports into the protected VLAN on one of the ESRP enabled switches.
C. A configuration change of priority of 255 to one of the ESRP enabled switches.
D. All of the above
OSPF Hello packets are recognized by all routers in the same area.
A. TRUE B. FALSE
The type of OSPF LSAs that are sent out within an automous system by an ASBR to advertise extreme routes are
A. Type 2
B. Type 3
C. Type 4
D. Type 5
What are the advantage/s of using integrated IS-IS as a routing protocol?
A. Requires only one routing protocol
B. Few implementation resources are required
C. Low on utilization of CPU memory and network resources
D. All of the above
What is true when different VLAN that are protected by Spanning Tree share the same physical ring topology?
A. They have to be configured in the same STPD when in EMISTP mode.
B. They may be configured in different STPD when in EMISTP mode, but have to shareone Root bridge
C. When configured in 802.1D mode, there is only one Root Bridge
D. They may be configured in different STPD when in 802.1D mode.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Extreme Networks exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your EW0-300 exam preparations and Extreme Networks certification application, do not hesitate to visit our Vcedump.com to find your solutions here.