Which CLI command should be used to configure the link cost for RIP?
A. config rip link-cost <10 Mbps_cost> <100 Mbps_cost> <1 Gbps_cost>
B. config rip link-metric <10 Mbps_cost> <100 Mbps_cost> <1 Gbps_cost>
C. config rip metric-table <10 Mbps_cost> <100 Mbps_cost> <1 Gbps_cost>
D. None of these
An Ethernet port cannot be added to two VLANs as an untagged port, with the following exception:
A. Neither VLAN has a configured 802.1Q tag.
B. Both VLANs are configured for differing protocol types.
C. 802.1Q negotiation is enabled on both VLANs.
D. None of these.
ICMP traffic on a Summit 1i switch is always handled in hardware at wire-speed by the ASIC.
A. TRUE
B. FALSE
RIP supports the distribution of non-originated RIP routes using a command beginning with: enable rip export.
A. TRUE
B. FALSE
This CLI command is valid: configure vlan default ipaddress 10.10.1.1/24 255.255.255.0.
A. TRUE
B. FALSE
You are taking steps to secure SNMP access to your switches by turning off SNMP access to the switches. What is the minimum action you need to perform?
A. Enter the CLI Command DISABLE SNMP ACCESS and then reboot the switch.
B. Enter the CLI Command DISABLE SNMP ACCESS
C. Enter the CLI Command DISABLE SNMP
D. Enter the CLI Command DISABLE SNMP and then reboot the switch.
The default setting for spanning tree on an Extreme Networks switch is?
A. Off for the entire switch.
B. Off for the entire switch, with the exception of VLAN Default.
C. On for the entire switch.
D. On for the entire switch, with the exception of VLAN Default.
What is a CP SYN?request?
A. A request from a TCP client to synchronize an FTP session
B. A request from a TCP station to establish a TCP session to another station
C. A request from a TCP server to re-send telnet data
D. TCP client to server keep-alive
You need to change the name of a VLAN from corporate to corp. What steps would you take to do this?
A. config name corporate corp
B. config corporate name corp
C. config name corp corporate
D. config corp name corporate
When RIP is enabled in ExtremeWare, which RIP settings are than also enabled?
A. Triggered updates
B. Poison Reverse
C. Split Horizon
D. All of these
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Extreme Networks exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your EW0-200 exam preparations and Extreme Networks certification application, do not hesitate to visit our Vcedump.com to find your solutions here.