When should an SP's non-maskable interrupt button be pushed?
A. SP is hung or non-responsive
B. After a successful code upgrade
C. Prior to a DIMM replacement
D. To reboot the SP
You are re-imaging a VNX Block. Which engineering mode password is used to restore factory configuration?
A. "wombat"
B. "messner"
C. "ship_it"
D. "SIR"
You are tasked with installing a new VNX array. You are unable to connect to the production network during installation, so you consider utilizing a portable network switch.
The service ports on which two VNX series arrays should not be connected to an external hub or switch?
A. 5400 or 5600
B. 5100 or 5300
C. 5300 or 5500
D. 5100 or 5600
It has been determined that a Storage Processor (SP) image is corrupt. How can the SP be restored while preserving client data?
A. Recover the boot image for a VNX Storage Processor
B. Reboot a VNX Storage Processor
C. Reboot a VNX Data Mover
D. Recover a VNX Control Station
What is the recommended corrective action to take if a mistake was made during initialization of a VNX Unified array?
A. Reset the VNX for VIA
B. Reboot the Data Movers
C. Rerun VIA
D. Reboot Control Station 0
An EMC CE has provided you with patches for the NAS for File 8.0 on a DVD. Which control station command will attach the DVD to the OS?
A. mount /media/cdrom
B. umount /media/cdrom
C. fdisk /media/cdrom
D. du /media/cdrom
On a VNX, SPA is unavailable through Unisphere and does not respond to a ping. The engineer observes an amber light on the front of the SP. What is the possible state of the SP and what corrective action should be taken?
A. SP has failed DIMMs. Replace DIMMs and/or CPU Module
B. SP has two failed power supplies. Replace the power supplies.
C. SP is hung while in degraded mode. Re-image the SP.
D. SP is hung while starting the ESP driver, Re-seat SPE management switch and reboot SP.
You are tasked with running CLI commands. You discover that SPB is responsive, but SPA is in a degraded mode. If running commands from SPB, what is the function of the speclcli - issuePeerNMIcommand?
A. Triggers a panic dump on SPA
B. Triggers a panic dump on SPB
C. Display the startup progress on SPA
D. Display the startup progress on SPB
You are diagnosing a connectivity issue with a VNX array SP. What URL will access the SP using RemotelyAnywhere?
A. https://"SP IP ADDRESSS":9519
B. https://"SP IP ADDRESS":8080
C. https://"UNISPHERE IP ADDRESS":81
D. https://"SP IP ADDRESS"/setup
After a new VNX 5400 was installed and powered up, the Data Movers are continuously rebooting. It has been determined that a cabling issue is at fault.
Which configuration should be checked first as the most likely cause?
A. Data Mover to SP FC cabling
B. SPS to vault DAE cabling
C. Blade Enclosure network cabling
D. DAE SAS cabling
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only EMC exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your E20-690 exam preparations and EMC certification application, do not hesitate to visit our Vcedump.com to find your solutions here.