What does the symmask command allow the end user to do?
A. Initialize a Device Masking database
B. List database
C. List devs
D. Set heterogeneous
Click the Exhibit button. What is indicated by this icon displayed in the PowerPath Monitor Taskbar Icons? **Exhibit Mising**
A. Degraded
B. Failed
C. Server Not Responding
D. Standard
A customer has a new HP server and CLARiiON array being installed using PVLinks as the failover software. What must be done to allow PVLinks to work properly?
A. ArrayCommPath must be set to 1 and pvtimeout set to 120.
B. Must change the system type to 10 on the CLARiiON and update the agent.config file.
C. Must change the system type to 2 on the CLARiiON and update the agent.config file.
D. Nothing, PVLinks will work properly as the default for HP.
EMC Customer Service has determined a customers DS4100B needs to be replaced. After bringing the replacement switch (another DS4100B) online, the storage administrator recognizes the Microsoft Exchange MSCS cluster cannot access the CX 3-80 storage over one (1) of its two (2) 4 Gb/s HBA paths. What is the likely problem?
A. Customer Service engineer configured the wrong IP address for the replacementDS4100B, hence creating an IP conflict with the other fabrics good DS4100B
B. Customer Service engineer didnt move the old GBICs to the new switch, hence theswitchport GBIC now has a different WWN.
C. The customer has standardized on hard zoning, and the Customer Service engineerplugged one of the CX 3-80 storage ports into the wrong DS4100B switch port.
D. The customer has standardized on soft zoning, and the Customer Service engineerplugged one of the CX 3-80 storage ports into the wrong DS4100B switch port.
A customer is adding a new FA to an existing Symm and wants to add multiple servers to this new FA What is one step that must be done to allow LUN masking for the new servers?
A. Create storage groups for each server
B. Enable Access Logix
C. Run the symlmf command from each server
D. Enable the VCM bit on this FA
What must be done to allow LUN masking for multiple servers attached to a CLARiiON array?
A. Enable Access Logix
B. Enable Volume Logix
C. Turn on default zoning
D. Zone with WWNs of HBAs to both SPs
Click the Exhibit button. What is indicated by this icon displayed in the PowerPath Monitor Taskbar Icons? **Exhibit Mising**
A. Degraded
B. Failed
C. Server Not Responding
D. Standard
For which operating systems are the SCSI-3 (SC3) bit set on a Symmetrix FA port?
A. Used for Heterogeneous FA Port Sharing/IBM AI with FC 6227, 6228, 6239/VMware
B. Used for Solaris only
C. Used for Windows/Solaris/AIX
D. Used for Windows/Solaris/HP-UX
For which operating systems are the Disable Q Reset on UA (D) bit set on a Symmetrix FA port?
A. Used for Heterogeneous FA Port Sharing/IBM AI with FC 6227, 6228, 6239/VMware
B. Used for Solaris only
C. Used for Windows/Solaris/AIX
D. Used for Windows/Solaris/HP-UX
You run a naviseccli command against a CLARiiON's SP and get the following: "Security file not found. Already removed or check -secfilepath option. What is the reason for this error?
A. The Navisphere security file hasn't been created.
B. The path hasn't been set for naviseccli.
C. The SP is not reachable.
D. You are not a privileged user in the agent config file.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only EMC exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your E20-351 exam preparations and EMC certification application, do not hesitate to visit our Vcedump.com to find your solutions here.