Symantec Symantec Certifications 250-254 Questions & Answers

• Question 51:

  How do you add the admin account to receive notification?

  A. Modify the notifier SmtpRecipients attribute while online

  B. Edit SmtpRecipients in the main.cf file of the active cluster

  C. Modify the SmtpRecipients attribute and restart the notifier

  D. Run the notifier [email protected] l=Warning command

  Correct Answer: C

• Question 52:

  While in Jeopardy, the system with the ONLINE GroupA service group crashes,Which GroupA attribute is set on the surviving systems?

  A. AutoStart

  B. FAULTED

  C. AutoDisabled

  D. STALE_ADMIN_WAIT

  Correct Answer: C

• Question 53:

  A failover service group uses the Process agent to start and stop an application and to monitor a list of processes. After bringing the group to an ONLINE state on a cluster system, you kill the monitored processes. The Enabled and Critical attributes of the resource are both set to a value of 1. The RestartLimit attribute for the resource is still set to the default value. Which action will VCS take?

  A. Increment the TotalFault attribute

  B. Initiate service group failover

  C. Automatically restart the application

  D. Take the service group offline without failover

  Correct Answer: B

• Question 54:

  Given a service group where FailOverPolicy=Load, which system attribute does HAD use to determine the failover target?

  A. Capacity

  B. Load

  C. Prerequisites

  D. AvailableCapacity

  Correct Answer: D

• Question 55:

  Assume that the GroupA service group is online on SystemB.

  Given the following configuration file:

  group GroupA (

  SystemList = { SystemA = 1, SystemB = 2 }

  AutoStartList = { SystemA } ) IP ip0 ( Device = nic0 Address = "10.10.10.10" NetMask = "255.255.255.0" ) NIC nic0 ( Device = nic0 NetworkType = ether ) NIC nic1 ( Device = nic1 NetworkType = ether ) ip0 requires nic0 What happens to the GroupA service group if the network cable connected to nic0 is unplugged on

  SystemB?

  A. GroupA faults on SystemB and attempts to fail over to SystemA.

  B. GroupA faults on SystemB and attempts to restart on SystemB.

  C. IP traffic is rerouted to the nic1 interface.

  D. The nic0 resource faults and GroupA stays partially online.

  Correct Answer: A

• Question 56:

  What does freezing a service group prevent?

  A. VCS notification of faults in the service group

  B. Monitoring of VCS resources in the service group

  C. Online and offline operations in the service group

  D. Modification of resource attributes in the service group

  Correct Answer: C

• Question 57:

  A PreOnline trigger is being tested on a three-system cluster with system names SystemA, SystemB, and SystemC. The trigger works for GroupA on all systems. However, the trigger fails to run for GroupB. How can this be corrected?

  A. Set the EnablePreOnline attribute for GroupB

  B. Copy the PreOnline trigger to all systems

  C. Run the hagrp -modify GroupB PreOnline 1 command

  D. Run the hatrigger -modify GroupB PreOnline command

  Correct Answer: C

• Question 58:

  Which conditions must be met for the service group to fail over? (Choose three.)

  A. AutoFailover must be set to default.

  B. ManageFaults must be set to NONE.

  C. The service group must not be frozen.

  D. AutoStart must be set to default.

  E. At least one failover target must be running.

  Correct Answer: ACE

• Question 59:

  A two-system VCS cluster has two dedicated Ethernet heartbeat links andI/O Fencing enabled. What will happen if both heartbeat links simultaneously fail?

  A. The cluster automatically stops on both systems.

  B. All services groups are frozen on both systems.

  C. Both systems panic and reboot into the cluster.

  D. One system panics and the other remains running.

  Correct Answer: D

• Question 60:

  The cluster is in ADMIN_WAIT on startup. You restore the main.cf from a backup copy and verify it. What do you use next?

  A. hastart -force

  B. hastart -all

  C. hasys -force

  D. hasys -start

  Correct Answer: C