What considerations are required when configuring IPV6 with Wire mode?
A. IPv6 in Wire mode is only supported in R77.
B. IPV6 must be configured on both end points.
C. IPV6 is not supported in Wire mode.
D. You must use internal IPv6 addressing space to use Wire mode.
Which operating systems support Wire mode?
A. SecurePlatform and GAIA
B. Solaris and SecurePlatform
C. IPSO and SecurePlatform
D. IPSO and GAIA
In Wire mode. if a packet reaches the gateway from a trusted source and is destined to a trusted destination, will the firewall do stateful inspection?
A. No, but IPS inspection will still be enforced.
B. Yes, the Firewall always performs stateful inspection.
C. Yes, but only if SecureXL is disabled.
D. No
Why would you choose to combine dynamic routing protocols and VPNs?
A. All options listed.
B. In the case of one tunnel failure, other tunnels may be used to route the traffic.
C. Dynamic-routing information can propagate over the VPN, utilizing the VPN as just another point-topoint link in the network.
D. The VPN device can be automatically updated with network changes on any VPN peer Gateway without the need to update the VPN Domain's configuration.
Where can you configure OSPF on a GAiA firewall?
A. cpconfig
B. WebUI
C. SmartDashboard
D. sysconfig
You want to enable OSPF on Secure Platform, but you notice that the required gated daemon is not running. How can you enable this?
A. Enter cpconfig, type Y to enable OSPF, type Y to restart Check Point services.
B. Enter cpconfig, type Y to enable Advanced Routing, type Y to restart Check Point services.
C. At the command prompt enter tellpm gated.
D. Add an OSPF rule to your Rule Base.
You are configuring OSPF on your Secure Platform firewall. You are in expert mode and run the commands: interface vt-Gateway_C IP ospf 1 area 0.0.0.0
exit
When you run show running-config you do not see your OSPF configuration listed Why?
A. You did not run command save running config before you exited.
B. You should not have moved to expert mode to make these configurations.
C. You did not run command save configuration before you exited.
D. You did not run command enable before you exited.
Which routing protocols are not supported with GAIA OS running VTIs?
A. RIPv1; RIPv2
B. BGP
C. Static routes
D. OSPF
Jane wants to create a VPN using OSPF. Which VPN configuration would you recommend she use?
A. Site-to-site VPN
B. Domain-based VPN
C. Route-based VPN
D. Remote-access VPN
You are configuring dynamic VPN routing using OSPF. You have defined the gateways, created a fully meshed VPN Community that includes all participating Gateways; created a rule to accept OSPF and configured dynamic routing. OSPF adjacencies are not establishing. Which of the following could explain why?
A. You have overlapping encryption domains.
B. You have not configured VTIs.
C. You must to create a VPN star community.
D. Check Point does not support dynamic VPN routing using OSPF.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only CheckPoint exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 156-115.77 exam preparations and CheckPoint certification application, do not hesitate to visit our Vcedump.com to find your solutions here.