Free EW0-100 Exam Dumps Preview

When a port is added to a tagged VLAN, jumbo frame support must be enabled to compensate for the increased frame size.

What is the default value for the RIP garbagetime setting?

Which command would you use to configure VLAN corporate with a tag value of 100?

The ESRP master state continuously changes between the two ESRP enabled switches. You determine that this is happening because:

ExtremeWare can automatically upload the active configuration via FTP.

How will you change the CLI prompt from the default display to NA-CHI-B6-F2-001?

Which RIP settings are enabled by default?

You need to change the name of a VLAN from corporate to corp.

What steps would you take to do this?

How do you disable Poison Reverse?

Which ExtremeWare feature permits ESRP to increase the number of protected VLANs by placing them under the control of a master VLAN?

How would you schedule a configuration download to occur at regular intervals?

FILL BLANK

You need a single syslog server to list each level of log messages in different files.
You configure the syslog server to segregate the messages through the __________ feature.

When enabling load sharing in an Extreme switch, only a single switch must be configured. The switches

will auto-negotiate the port sharing settings via the EDP protocol.

Exhibit:

Given the following diagram, which command would you use to send the switch configuration from the switch to the TFTP server?

What is the default value for the RIP routetimeout setting?

By default OSPF hello packets are sent out every:

Which of the following is a predefined protocol filter?

Which commands would you use to configure an ESRP domain with VLAN HQ as the super-ESRP-VLAN and VLAN floor-1 as the sub-ESRP-VLAN?

What is the proper command syntax to create a user-level account for John Doe?

An OSPF router connected to a RIP network and performing route redistribution is considered:

Which of the following can you use to create a router interface?

What type of flow control should be used when configuring a console connection for an Extreme Networks switch?

A routing protocol such as RIP, OSPF, or BGP must be enabled before a switch can perform IP routing.

Which of the following is a predefined protocol filter?

FILL BLANK

You are connected to Vista through the default VLAN (10.0.0.1). You have created VLAN backbone through Vista. After configuring its IP address (20.0.0.2) you are no longer able to connect to the switch through Vista. You realize this happened because you forgot to click on the __________ button before proceeding.

FILL BLANK

__________ is a QoS feature that detects if switch traffic is filling up a hardware-forwarding queue and performs random packet discards to resolve the

situation.

The steps for OSPF to begin routing packets are:

FILL BLANK

What is the standard for signaling QoS values in a tagged Ethernet frame?

Which of the following commands could you use to determine which ports are enabled for ESRP host attach?

A VLAN can be a member of up to 64 STPDs.

OSPF area 10.10.10.10 connects to OSPF area 1.1.1.1. The network has been running for a week without issues. While examining the LSDB of an internal router in area 1.1.1.1, the network administrator sees that there are no Type-1 LSAs for area 10.10.10.10 listed. The network administrator is puzzled.

Why does this situation exist?

If a switch's root bridge and bridge ID are the same, it is:

What is the maximum recommended number of VLANs for a multinetted port?

FILL BLANK

What protocol must be enabled in order to use ESRP?

OSPF area 20.20.20.20 connects to OSPF area 2.2.2.2. The network has been running for a week without issues. While examining the LSDB of an internal router in area 20.20.20.20, the network administrator sees that there are no Type-2 LSAs for area 2.2.2.2 listed. The network administrator asks your opinion about this.

What do you say?

User account names and VLAN names share the same name space. A user named "default" cannot be created.