Free E20-593 Exam Dumps Preview

You are installing a new EMC NetWorker server and would like alerts to be sent automatically to EMC Support.

What additional component needs to be included as part of this installation?

What is a characteristic of the EMC NetWorker SnapImage module?

Which EMC NetWorker command lists save sets stored on each volume?

A Dell EMC NetWorker server has been configured to stage from an AFTD upon reaching a high water mark of 80%.
After the staging begins, which rule determines when the staging process ends?

Refer to the exhibit.

An EMC NetWorker customer has two data zones, A and B, with autochanger AC1 and AC2, respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is configured as a shared autochanger. Two drives of AC2 are statically assigned.

How many drives of AC2 can be shared in Zone A?

A customer has the following EMC NetWorker configuration:

Two remote storage nodes, Node A and Node B
Two virtual tape libraries configured on Node A and Node B, respectively Twelve virtual tape devices with four drives attached to the NetWorker server, Node A and Node B, respectively

How many nsrlcpd processes are running on the NetWorker server?

Which backup device type(s) is supported for NMM Exchange backups?

What is a characteristic of EMC NetWorker volume cloning?

For which Microsoft operating system can you use the EMC NetWorker option to turn off VSS snapshots?

A customer has an Oracle 11g database running on a RAC cluster with ASM. It occupies approximately 5 TB on a Symmetrix DMX. They have an RTO of four hours. They intend to implement PowerSnap with EMC NetWorker version 7.6 to back up the BCVs using RMAN scripts and a proxy host.

What prevents this implementation from being successful?

What is a characteristic of an EMC NetWorker advanced file type device?

An administrator experienced a power failure in their data center. After checking their Dell EMC NetWorker servers, the administrator discovered an error message on one of the NetWorker server. The message indicates that the media database does not exist.

What is the recommended way to resolve any corruption in the database?

What is a characteristic of VCB backups in EMC NetWorker?

Which process needs to be running on each EMC NetWorker client?

An EMC NetWorker administrator wants to move NMC from the server where it is currently installed to a new Windows system. The NMC reporting feature is being used.

What must be installed on the new system, in addition to the Console server software?

DRAG DROP

What is the recommended sequence to create a new Dell EMC NetWorker data protection policy?

In an EMC NetWorker environment, a clone volume (physical tape) required for a recovery is not currently mounted.

Which attribute is consulted first to determine the storage node used for the recovery?

What are the default target and maximum session settings for an AFTD?

Which backup level requires the fewest number of volumes to restore?

An EMC NetWorker administrator wants to prevent tapes from staying mounted after backups complete.

Which parameter must be set?

What is an EMC NetWorker consolidated backup?

Which daemon supports remote execution requests for backup requested by EMC NetWorker Management Console?

A user on the EMC NetWorker client wants to initiate a backup of selected files.
At a minimum, which components must be configured before the backup can succeed?

An EMC NetWorker Administrator needs to restore a client file. However, the save set for that backup is in a recoverable state.

What must be done before performing a browsable recovery?

A customer is adding a new jukebox to an EMC NetWorker environment. The jukebox is connected and powered on. The customer powers on the NetWorker server and verifies the new library is visible to the OS. The customer brings up the Device Administration window and verifies the existing jukebox is functioning properly. However when the customer attempts to configure the new library using the Device Administration window function "Configure All Libraries", it fails to configure and instructs the customer that they must use jbconfig to manually configure this library.

What is the most likely reason that the customer is forced to use jbconfig rather than the Device Administration window?

An EMC NetWorker administrator wants to perform backup of an application server only if a certain number of transaction logs have been reached.

What type of backup needs to be performed?

A client save set is backed up to an EMC NetWorker backup pool and later cloned to a volume in a clone pool.
On the volume, what property determines when the volume in the clone pool is a candidate for recycling?

A site is using EMC NetWorker with EMC NetWorker Module for Databases and Applications for backups.
The administrator wants to eliminate redundant backup data to significantly reduce backup storage requirements.

Which component would you recommend adding to the backup environment?

On a Linux server, what is used to manage the EMC Common Licensing Platform (CLP) server?

In an EMC NetWorker environment with a single datazone, which EMC NetWorker software component would you install on hosts that manage backup devices?

You create an EMC NetWorker advanced file type device. You then notice that the corresponding read-only device is missing.

What is a possible cause?

An EMC NetWorker administrator notices that clients are being backed up one at a time, even though they are scheduled to start simultaneously.

What may be a cause of this?

Client A performs backups to Storage Node S where the backup operations are managed by EMC NetWorker Server N. NetWorker Management Console is running on Server Y. Client A's configuration information was lost.

To which component must the client configuration data be restored?

Which EMC NetWorker command lists save sets stored in a particular volume?

In an EMC NetWorker environment, you are required to keep media in drives for only 10 minutes after completion of backup.

What parameter must be set?

An EMC NetWorker administrator configures an advanced file type device, setting the device target sessions to two, and max sessions to four.

How is data written to the advanced file type device?

Refer to the exhibit.

In the NMM backup workflow, which process is shown in the box marked "A"?

What is the primary function of the EMC NetWorker job daemon?

What is a characteristic of the EMC NetWorker Auto Media Management feature?

A customer's EMC NetWorker environment has a Solaris client that had been backing up without failing for several weeks. The client has the following local mount points:

/
/usr
/home
/var

And two nfs mount points:
/mars/data1
/jupiter/data1

The save set was identified as "ALL" in the client resource. The client had crashed and was successfully rebooted the previous day. The first request for a restore for this client was submitted for the last night's backup of /mars/data1/ Monthly.doc and /jupiter/data1/Weekly.xls. The jupiter restore is successful but the mars data is not found and fails to be restored.

What is the most likely cause of this restore failure?

A backup administrator wants to verify that data was successfully written to an AFTD.

Which window in NMC would the administrator select to go gather this information?

A new Dell EMC NetWorker installation is being integrated with Active Directory for user authentication.

Which command is used to create the relationship between NetWorker Authentication and Active Directory?

You are using NetWorker Management Console (NMC) to manage an EMC NetWorker server. You want to add a second data zone to your environment and monitor this data zone using the existing NMC.

How can this be done?

When Dell EMC NetWorker is integrated with a Data Domain system with DD Boost, what analyzes the data stored on the Data Domain and sends only the unique data for storage?

In which order are the steps performend when creating an EMC NetWorker application-based snapshot?

Which daemon is responsible for organizing backup data before it is written to the backup media?

You are troubleshooting a problem with EMC NetWorker resources and some of the attributes are not being displayed in NetWorker Administration GUI.

What is done to display the advanced attributes?

Which protocol is used when performing an EMC NetWorker backup to a cloud device?

What is a characteristic of a Dell EMC NetWorker module backup?