Free E20-340 Exam Dumps Preview

You have set up and are using ALUA and PowerPath with your CLARiiON CX4-480 array. You have just experienced a front-end path failure.

Which driver will route the I/O to the SP owning the LUNs through the CMI channel?

What CLARiiON software controls visibility to LUNs in a CLARiiON storage system?

When working with FLARE 30, which tool is required when upgrading FLARE or performing a DAE upgrade?

Which is a valid clone ID?

The Access Logix ACL entries consist of the CLARiiON SP port WWN and which other two elements?

On a ED-DCX-4S-B midsize backbone director you will find four ICL ports.

What are these ports used for?

What communication protocol does Unisphere use?

A customer's Windows 2008 server has four NICs connected to the private subnet used for iSCSI traffic.
Server IP parameters are left at the default settings.

How will iSCSI I/O traffic be distributed across the NICs?

During the discovery phase of the Array Initialization Utility, what do you use to identify the array you want to configure?

Refer to the exhibit.

What is true of the clone?

What is the maximum number of storage groups that can be created for a CX4-480 with FLARE release 30?

A customer is trying to discover target ports using a subnet scan. The Unisphere Server Utility continuously fails to discover target ports.

What would cause the discovery process to fail?

Which statement accurately describes DAE3P enclosures?

Refer to the exhibit.

Which slots contain CR8 core blades?

A customer has requested onsite assistance because they are currently unable to communicate with SPA.
You arrive onsite and connect to the GbE Service LAN.

What IP address do you use to connect to SPA?

Which Connectrix B-series switch provides a maximum of 8 Gb/s connectivity per port?

A customer has a multi-path environment using ESX 4.x native failover software connected to a CX4.

What are the correct settings for this environment?

What is the purpose of the ArrayCommPath setting in a CLARiiON storage system?