Free CWSP-206 Exam Dumps Preview

In an IEEE 802.11-compliant WLAN, when is the 802.1X Controlled Port placed into the unblocked state?

What field in the RSN information element (IE) will indicate whether PSK-or Enterprise-based WPA or WPA2 is in use?

Which one of the following is not a role defined in the 802.1X authentication procedures used in 802.11 and 802.3 networks for port-based authentication?

You perform a protocol capture using Wireshark and a compatible 802.11 adapter in Linux. When viewing the capture, you see an auth req frame and an auth rsp frame. Then you see an assoc req frame and an assoc rsp frame. Shortly after, you see DHCP communications and then ISAKMP protocol packets.

What security solution is represented?

A network security auditor is preparing to perform a comprehensive assessment of an 802.11ac network's security.

What task should be performed at the beginning of the audit to maximize the auditor's ability to expose network vulnerabilities?

You manage a wireless network that services 200 wireless users. Your facility requires 20 access points, and you have installed an IEEE 802.11-compliant implementation of 802.1X/LEAP with AES-CCMP as an authentication and encryption solution.
In this configuration, the wireless network is initially susceptible to what type of attack?

A WLAN protocol analyzer trace reveals the following sequence of frames (excluding the ACK frames):

1. 802.11 Probe Req and 802.11 Probe Rsp
2. 802.11 Auth and then another 802.11 Auth
3. 802.11 Assoc Req and 802.11 Assoc Rsp
4. EAPOL-KEY
5. EAPOL-KEY
6. EAPOL-KEY
7. EAPOL-KEY

What security mechanism is being used on the WLAN?

Fred works primarily from home and public wireless hotspots rather than commuting to office. He frequently accesses the office network remotely from his Mac laptop using the local 802.11 WLAN.
In this remote scenario, what single wireless security practice will provide the greatest security for Fred?

For a WIPS system to identify the location of a rogue WLAN device using location pattering (RF fingerprinting), what must be done as part of the WIPS installation?