Free CWNA-106 Exam Dumps Preview

Which unit of measurement is an absolute unit that is used to quantify power levels on a linear scale?

XYZ Company has decided to install an 802.11 WLAN system that will support 1000 wireless users, but they are concerned about network security. XYZ is interested in deploying standardized security features.
In addition to WPA2-Enterprise with PEAP and role-based access control, XYZ would like to support management frame protection as well as a fast secure roaming protocol for future mobile handsets.

As XYZ Company selects a product to deploy, what two IEEE amendments, which are included in 802.11- 2012, should be supported to provide the management frame protection and fast secure roaming security features?

When using an RF splitter to connect one transceiver to sector antennas loss is incurred.

What is this loss called?

What factors will have the most significant impact on the amount of wireless bandwidth available to each station within a BSS?

Which antenna types are commonly used by indoor Wi-Fi devices in a MIMO diversity implementation? (Choose 2)

XYZ Company has hired you to perform an indoor site survey of their 5-storyfacility. They own the building and rents out unused floors (floors 2 and 4) to other companies, and the other companies already use 802.11 WLANs. XYZ Company wants all of the offices they occupy to be surveyed as part of the project.

What actions should be recommended as part of the site survey project? (Choose 2)

When a client station sends a broadcast probe request frame with a wildcard SSID, how do APs respond?

What statement is true concerning the use of Orthogonal Frequency Division Multiplexing (OFDM) in IEEE 802.11 WLANs?

What statement describes the authorization component of a AAA implementation?

Youare implementing a VHT-capable AP.

Which one of the following channels is available in the 802.11ac amendment to the 802.11-2012 standard, which was not available in the standard before this amendment?

What WLAN system feature is required to produce a scenario with the following configuration on a single access point? (Choose 2)

1. SSID = Guest / BSSID = AA:AA:AA:AA:AA:AA /

VLAN = 22 / Subnet = 192.168.22.0 / RF Channel = 6

2. SSID = Corporate / BSSID = BB:BB:BB:BB:BB:BB /

VLAN = 33 / Subnet = 192.168.33.0 / RF Channel = 6 /User Type A

3. SSID = Corporate / BSSID = BB:BB:BB:BB:BB:BB /

VLAN = 44 / Subnet = 192.168.44.0 / RF Channel = 6 / User Type B

ABC Company is planning toinstall a new 802.11ac WLAN, but wants to upgrade its wired infrastructure first to provide the best user experience possible. ABC Company has hired you to perform the RF site survey. During the interview with the network manager, you are told that the newEthernet edge switches will support VoIP phones and 802.11 access points, both using 802.3 PoE.
After hearing this information, what immediate concerns do you note?

To ease user complexity, your company has implemented a single SSID for all employees. However, the network administrator needs a way to control the network resources that can be accessed by each employee based on their department.

What WLAN feature would allow the network administrator to accomplish this task?

When performing a site survey for a Multiple Channel Architecture (MCA) system in a multi-tenant building with five floors, what aspect should you, as the site surveyor, keep in mind?

In addition to coverage analysis results, what should be included in a site survey report to ensure WLAN users experience acceptable performance?

The IEEE 802.11-2012 standard requires VHT capable devices to be backward compatible with devices using which other 802.11 physical layer specification (PHY)?

What are two channel modes specified by the 802.11n (High Throughput) PHY? (Choose 2)

Which data rate is supported by 802.11g radios that is not supported by 802.11a radios?

ABC Company is planning a point-to-multipoint outdoor bridge deployment with standalone (autonomous) 802.11 bridge units. 802.1X/EAP will be used for bridge authentication. A Linux-based RADIUS server will be used for authentication.

What device in the bridge implementation acts as the 802.1X Authenticator?

What factors are taken into account when calculating theLink Budget of a point-to-point outdoor WLAN bridge link?

You were previously onsite at XYZ's facility to conduct a pre-deployment RF site survey. The WLAN has been deployed according to your recommendations and you are onsite again to perform a post-deployment validation survey.

When performing this type of post-deployment RF site survey for VoWiFi, what are two steps that must be performed? (Choose 2)