Free C1000-031 Exam Dumps Preview

Where should adapter configurations be validated before adding or rearranging adapters on a Power Enterprise Server?

Which of the following is a RAS improvement of a Power System E980 over a Power System E880C?

A customer has ordered a Power System E980. The system has been built, but cannot be shipped.

What would prevent the system from being shipped?

A customer with a Power System 770 and direct SAN I/O is planning a migration to a Power System E980.
The Power System 770 has four 8Gb PCIe 2-port full-height Fibre Channel adapters with all storage going through the SAN. The customer wants to keep the same WWPNs, and avoid a SAN reconfiguration.

What procedure should be recommended?

Which of the following is an advantage of Power System Servers over Oracle Exadata solutions?

A customer has two POWER8 processor-based servers with eight partitions on each system. They are upgrading to two POWER9 processor-based servers and want to improve their application uptime during the upgrade/migration to the new servers.

What feature should they implement?

Due to an emergency situation, a customer needs to activate all processor and memory resources in a Power System E980 for ten days.

Which of the following could be used to achieve this need with the least possible cost?

Which capability is used to reallocate memory from one LPAR to another?

A customer with an AIX in-house SMT2 application on POWER6 would like to upgrade to POWER9. The customer would like to know the relative performance of the servers.

Which resource provides the SMT2 performance of the two systems?

A customer wants to virtualize their storage environment and would like to use NPIV.

Where will the storage mulltipathing software run?

A customer has a 40 core Power System E980 and would like to use Mobile Capacity on Demand.

What is the minimum of static processor activations that are required?

A customer with a Power System E870 with five IBM i licenses wants to replace it with a new Power System E980 for a new workload. They will require eight IBM i licenses.

What is the most cost-effective way for the customer to accomplish this?

Which technology allows for simultaneous network adapter sharing between LPARs using VIOS and LPARs with dedicated I/O?

Which of the following needs to be taken into consideration when designing an IBM Power System E980 solution?

A customer requires that each client partition have access to two different VLANs. VLAN tagging will NOT

be used in the environment.
There will be four client partitions, each of which will be connected to VLAN1 and VLAN2.
There will be two VIOS.
Redundant Ethernet connections will be accomplished using the Shared Ethernet Adapter (SEA) and dual VIOS.

What is the minimum number of Ethernet ports that will be required in each VIOS?

When using Mobile Activations in Power Enterprise Pools and LPM (Live Partition Mobility) migration, which of the following is true?