VCEdump

AX0-100 Axis Network Video

PDF question preview Back to product

Reading controls

Reader tools

Free demo

23 of 150 questions

Purchase the full version to unlock every question and answer.

View the full question set

Preview tools

Try Web TestEngine

Question formats

Single choice18

Multiple choice4

Drag & drop1

Axis Communications · AX0-100

Free AX0-100 Exam Dumps Preview

Preview real exam questions, verified answers and available explanations before choosing a study plan.

Question 1

Multiple choice

In which cases would a people counting analytic be used with an Axis camera (Choose three)?

A
Fire protection in subways
B
Statistics for retail stores
C
Early warning system for flooding
D
Enhanced service levels for public transportation
E
Crowd detection for marketing purpose

Reveal answer details Close answer details

Correct answersB, D, E

Question 2

Single choice

Which security features are provided through a managed switch?

A
IEEE 802.1 X port-based authentication and HTTPS encryption
B
IP subnets and VLANs
C
HTTPS encryption and IP subnets
D
IEEE 802.1 X port-based authentication and VLANs

Reveal answer details Close answer details

Correct answerD

Question 3

Drag & drop

DRAG DROP

Match the protocol to its default port number. Drag each gray box from the left column to the matching blue box in the right column.

Reveal answer details Close answer details

Question 4

Single choice

Looking at the picture below, which setting would best address the blurring that's occurring with faster moving objects?

A
Increase image brightness
B
Adjust the exposure settings
C
Uncheck backlight compensation
D
Increase image contrast

Reveal answer details Close answer details

Correct answerB

Question 5

Single choice

Which of the following general statements about illumination needs of PTZ cameras is true?

A
PTZ should not be used with IR light
B
The f-stop value of a lens will get higher if you zoom in
C
PTZ cameras in general tend to have lower f-stop value compared to fixed cameras
D
PTZ cameras should not be used with mixed IR and white light

Reveal answer details Close answer details

Correct answerB

Question 6

Single choice

How can using PoE to power cameras help keep them running during a power outage?

A
PoE cameras use less cabling, allowing backup power supplies to last longer
B
PoE cameras are centrally powered from the Ethernet switches which are backed up by uninterrupted power supply (UPS)
C
The PoE standard requires connected devices to include backup batteries, to allow for network dropouts
D
Since PoE cameras are centrally powered by the server, you will only need to add backup power to the server to keep the system running

Reveal answer details Close answer details

Correct answerB

Question 7

Single choice

Which statement is true regarding H.264 and Motion JPEG?

A
The highest bandwidth savings using H.264 compared to Motion JPEG is at high frame rates
B
Bandwidth savings using H.264 has nothing to do with frame rate, only scene complexity
C
Bandwidth savings using H.264 has nothing to do with frame rate, only Group of Video (GOV) setting
D
The highest bandwidth savings using H.264 compared to Motion JPEG is at low frame rates

Reveal answer details Close answer details

Correct answerA

Question 8

Single choice

A Day & Night camera automatically removes the IR-cut filter for low light operations. In that mode, the camera becomes sensitive to IR light.

Which wavelength is the camera most sensitive to?

A
850 nm
B
950 nm
C
1140 nm
D
1350 nm

Reveal answer details Close answer details

Correct answerA

Question 9

Single choice

Image flickering is caused by

A
IR light
B
White light
C
Lack of light
D
Fluorescent light

Reveal answer details Close answer details

Correct answerD

Question 10

Single choice

A camera lens with a low f-stop value of 1.2 will outperform a lens with a higher f- stop value due to which one of the parameters below?

A
Better depth of field
B
Better low light capability
C
Improved sharpness
D
Less image artifacts

Reveal answer details Close answer details

Correct answerB

Question 11

Single choice

When initiating a surveillance project with a customer, which of the following should be considered first?

A
Understand which camera models to use
B
Understand the customer's technical knowledge
C
Understand the customer's goals and requirements
D
Understand the legal aspects for the installation

Reveal answer details Close answer details

Correct answerC

Question 12

Single choice

An installer wants to connect and power a P|R sensor from an Axis camera's I/O port.

What would be the output DC voltage?

A
1, 5V
B
3. 3 V
C
5V
D
7 V

Reveal answer details Close answer details

Correct answerB

Question 13

Single choice

Focusing a camera improves the image, but it also

A
Has an effect on the frame rate
B
Increases the bandwidth
C
Changes the pixel resolution
D
Decreases the bandwidth

Reveal answer details Close answer details

Correct answerB

Question 14

Single choice

The term f-stop, or f-number,

A
Relates the focal length of the lens to the zoom factor.
B
Measures the lens' capability to focus on objects at short distance.
C
Is the end position of the focus motor in an autofocus system.
D
Measures the lens' capability to collect light.

Reveal answer details Close answer details

Correct answerD

Question 15

Single choice

An integrator receives a specification for surveillance cameras for a large project, where the requirements are impossible to live up to.

Which of the key numbers below would have to change in order to find a camera to fill the demands?

A
60 fps
B
1080pHD resolution
C
160 dB dynamic range
D
Face recognition at 70 m (230 ft)

Reveal answer details Close answer details

Correct answerC

Question 16

Single choice

An installation with an AXIS P1344 experiences image flickering.

How can this be remedied?

A
Adding white light to the scene
B
Adding IR light to the scene
C
Changing the camera's exposure setting
D
Changing the camera's white balance

Reveal answer details Close answer details

Correct answerC

Question 17

Multiple choice

For which purposes would a thermal network camera be a viable alternative to a standard network camera? (Choose three)

A
Identification of a person
B
Detection at daylight
C
Detection at night
D
Detection in smoke and light fog conditions
E
License Plate Recognition

Reveal answer details Close answer details

Correct answersB, C, D

Question 18

Single choice

To get the best accuracy for a people counting application for customers entering a store, the camera should be mounted

A
Facing the entrance.
B
Facing the entrance at eye level.
C
Directly above the entrance.
D
Facing away from the entrance.

Reveal answer details Close answer details

Correct answerC

Question 19

Multiple choice

The ONVIF standard gives the end user benefits such as (Choose two)

A
Reduction of storage and network usage.
B
Improving the performance of the system.
C
Guarantees higher performance.
D
Future proof systems and more secure investments.
E
Increased flexibility and greater freedom of choice.

Reveal answer details Close answer details

Correct answersD, E

Question 20

Single choice

Adding network surveillance cameras to an existing Ethernet network

A
Is not recommended, since bandwidth demands from the surveillance video would likely congest the network.
B
Will benefit from using VLANs, to keep the surveillance video separate from other network traffic, reducing the risk for network congestion.
C
Will cause unacceptable video latency, due to the amount of UDP traffic taking precedence on the network.
D
Will benefit from establishing VPN connections to the cameras, reducing the risk of malicious users eavesdropping on the video.

Reveal answer details Close answer details

Correct answerB

Question 21

Multiple choice

A Privacy mask added to Live View (Choose two)

A
Hides parts of the scene.
B
Restricts access to the camera.
C
Can be removed from recorded video.
D
Lowers the bandwidth usage.
E
Can be made into any shape.

Reveal answer details Close answer details

Correct answersA, D

Question 22

Single choice

A camera can deliver up to two full resolution 30 fps H.264 streams. The customer wants to have four H.264 streams from the same camera.

What will be the resulting impact?

A
The camera will lower the resolution
B
The camera will lower the compression
C
The camera will lower the frame rate
D
The camera will lower the Group of Video (GOV) length

Reveal answer details Close answer details

Correct answerC

Question 23

Single choice

In order to comply with SMPTE standards of HDTV, the camera must meet the following:

A
Light sensitivity, aspect ratio, resolution, color fidelity
B
Aspect ratio, resolution, light sensitivity, frame rate
C
Light sensitivity, color fidelity, frame rate, aspect ratio
D
Frame rate, aspect ratio, resolution, color fidelity

Reveal answer details Close answer details

Correct answerD

Free AX0-100 Exam Dumps Preview

Axis Network Video

PREVIEW CONTENTS · 3 VOLUMES

QUESTION 1

QUESTION 2

QUESTION 3

QUESTION 4

QUESTION 5

QUESTION 6

QUESTION 7

QUESTION 8

QUESTION 9

QUESTION 10

QUESTION 11

QUESTION 12

QUESTION 13

QUESTION 14

QUESTION 15

QUESTION 16

QUESTION 17

QUESTION 18

QUESTION 19

QUESTION 20

QUESTION 21

QUESTION 22

QUESTION 23

VOL	TYPE	QUESTIONS
1	Single choice	18
2	Multiple choice	4
3	Drag & drop	1