Which protocol must be prioritized over IP networks to reduce VoIP audio latency?
Reveal answer details Close answer details
Correct answerA
Cisco · 350-801
Preview real exam questions, verified answers and available explanations before choosing a study plan.
|
Single choice
Which protocol must be prioritized over IP networks to reduce VoIP audio latency? Reveal answer details Close answer detailsCorrect answerA
Single choice
Which characteristic of distributed class-based weighted fair queueing addresses jitter prevention? Reveal answer details Close answer detailsCorrect answerC
Single choice
An administrator uses the Cisco Unified Real-Time Monitoring Tool to investigate recent calls on a Cisco UCM cluster. The SIP trace for an on-net, direct-media call shows two 180 Ringing and two 11 BYE messages. Why are there multiples of each message type in the trace? Reveal answer details Close answer detailsCorrect answerC
Single choice
How does Cisco define jitter? Reveal answer details Close answer detailsCorrect answerC
Single choice
Refer to the exhibit. ![]() An administrator is attempting to resolve a DTMF issue to a specific IVR and has supplied logs from the most recent issue. What is the cause and solution of the issue? Reveal answer details Close answer detailsCorrect answerC
Single choice
What must be modified on the administration page in Cisco UCM when designing layered security? Reveal answer details Close answer detailsCorrect answerD
Single choice
A high-speed network is often configured with a ve-class QoS model. Which classes are used in the model? Reveal answer details Close answer detailsCorrect answerB Explanation https://www.cisco.com/en/US/technologies/tk543/tk759/technologies_white_paper0900aecd80295a9b.pdf
Single choice
Refer to the exhibit. ![]() Which route pattern can the Cisco UCM administrator apply to the configuration to allow calls to "1306.1316.1326,13*6.13#6" only? Reveal answer details Close answer detailsCorrect answerD
Single choice
Refer to the exhibit. ![]() You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does no register to Cisco Unified Communication Manager while outside of the office. What is a cause of this issue? Reveal answer details Close answer detailsCorrect answerC Explanation References:
Single choice
Which traversal client must be deployed in an enterprise network when Mobile and Remote Access is configured? Reveal answer details Close answer detailsCorrect answerB
Single choice
On which protocol and port combination does Cisco Prime Collaboration receive notifications (Traps and InformRequests) from several network devices in the Collaboration infrastructure for which it has requested notifications? Reveal answer details Close answer detailsCorrect answerA Explanation References:
Single choice
Which QoS mechanism should be configured to provide low-latency treatment for delay-sensitive voice traffic? Reveal answer details Close answer detailsCorrect answerB Explanation LLQ is correct because the blueprint explicitly includes configuring Low Latency Queueing with class map, policy map, and service policy for media and QoS. WRED is a congestion-avoidance tool, while DNS SRV and CDP are unrelated to queuing treatment.
Multiple choice
During the Cisco IP Phone registration process, the TFTP download fails. What are two reasons for this issue? (Choose two.) Reveal answer details Close answer detailsCorrect answersB, E
Single choice
Which Cisco Unity Connection handler plays a greeting that announces the option to dial a user extension by default? Reveal answer details Close answer detailsCorrect answerC
Single choice
What an advantage of using of the SIP OAuth mode in Cisco Jabber? Reveal answer details Close answer detailsCorrect answerB
Multiple choice
What are two access management mechanisms in Cisco Webex Control Hub? (Choose two.) Reveal answer details Close answer detailsCorrect answersA, B Explanation The two access management mechanisms in Cisco Webex Control Hub are multifactor authentication and Active Directory synchronization. Multifactor authentication is a security measure that requires users to provide two or more pieces of evidence to verify their identity. This can include something they know, such as a password, and something they have, such as a security token. Active Directory synchronization is a process that allows Cisco Webex Control Hub to automatically synchronize user accounts from an Active Directory domain. This can simplify user management and provide users with single sign-on access to Cisco Webex Control Hub and other applications.
Single choice
Which service on the Presence Server is responsible for maintaining the point-to-point chat connections between Jabber clients? Reveal answer details Close answer detailsCorrect answerC
Single choice
What is the purpose of a Workspace in Cisco Webex Control Hub? Reveal answer details Close answer detailsCorrect answerD
Multiple choice
Which two types of device are supported by the Bulk Administration Tool? (Choose two.) Reveal answer details Close answer detailsCorrect answersA, B
Single choice
Which access control group is required on an end user to allow Jabber to do deskphone mode? Reveal answer details Close answer detailsCorrect answerB
Drag & drop
DRAG DROP Drag and drop the steps from the left into order on the right to activate self-provisioning services in Cisco ![]() Reveal answer details Close answer details![]()
Multiple choice
A customer enters no IP domain lookup on the Cisco IOS XE gateway to suppress the interpreting of invalid commands as hostnames. Which two commands are needed to restore DNS SRV or A record resolutions? (Choose two.) Reveal answer details Close answer detailsCorrect answersD, E
Single choice
Which command enables SIP OAuth mode on a Cisco UCM publisher node? Reveal answer details Close answer detailsCorrect answerB
Multiple choice
Which protocols does Cisco IM and Presence use to authenticate Jabber? Reveal answer details Close answer detailsCorrect answersA, B Explanation https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber/212471-jabber-login.html#anc5
Single choice
Which behavior occurs when Cisco UCM has a CallManager group that consists of two subscribers? Reveal answer details Close answer detailsCorrect answerC
Single choice
An engineer needs to confirm that a secure call is encrypting the media stream rather than only protecting signaling. Which technology should the engineer verify? Reveal answer details Close answer detailsCorrect answerB Explanation SRTP is correct because it secures RTP media streams, which is exactly the media-encryption requirement in the question. TLS secures signaling sessions, while NTP and LDAP serve time synchronization and directory functions.
Single choice
An administrator needs to stop the leading 9 from outbound calls on an IOS Voice Gateway and ensure that the system handles 911 emergency calls. Which configuration is needed to accomplish this task? ![]() Reveal answer details Close answer detailsCorrect answerB
Single choice
Which issue can occur if QoS is not deployed on a Cisco Collaboration architecture across the WAN? Reveal answer details Close answer detailsCorrect answerB
Single choice
What is the purpose of Mobile and Remote Access with Cisco Jabber in the cisco UCM? Reveal answer details Close answer detailsCorrect answerA
Single choice
What is the purpose of a hybrid Local Gateway? Reveal answer details Close answer detailsCorrect answerB
Single choice
Which service must be enabled when LDAP on cisco UCM is used? Reveal answer details Close answer detailsCorrect answerC Explanation References:
Single choice
Which Unity Connection feature is directly associated with turning a phone message lamp on or off when voicemail state changes? Reveal answer details Close answer detailsCorrect answerA Explanation MWI is correct because Message Waiting Indicator functionality controls the phone lamp or message status notification based on voicemail conditions. SRTP secures media, FAC controls call authorization, and LLDP is a Layer 2 discovery protocol.
Single choice
A company wants to provide remote user with access to its premises Cisco collaboration features. Which components are required to enable cisco mobile and remote access for the users? Reveal answer details Close answer detailsCorrect answerB
Single choice
An engineer must deploy the Cisco Webex app to a shared Windows Virtual Desktop Infrastructure environment in the C:\Program Files folder. Which command line argument must be run when running the installer? Reveal answer details Close answer detailsCorrect answerA
Single choice
Which option must be used when configuring the Local Gateway for a Cisco Webex Calling trunk? Reveal answer details Close answer detailsCorrect answerB Explanation A certificate-based trunk is a type of trunk that uses certificates to authenticate the connection between Webex Calling and the Local Gateway 1. A Local Gateway is a supported session border controller that terminates the trunk on the premises
Single choice
Refer to the exhibit. ![]() Assume that the bottom logical partition policy entry in Cisco Unified Communications Manager was provisioned last. How is the call treated when an IP phone in the Bangalore GeoLocation places a call to a MGCP gateway with FXS ports in the San Jose GeoLocation? Reveal answer details Close answer detailsCorrect answerA
Single choice
Refer to the exhibit. ![]() This INVITE is sent to an endpoint that only supports G729. What must be done for this call to succeed? Reveal answer details Close answer detailsCorrect answerB Explanation A transcoder takes the media stream of one codec and transcodes (converts) it from one compression type to another compression type. For example, it could take a stream from a G.711 codec and transcode (convert) it in real time to a G.729 stream. In addition to codec conversion, a transcoder resource can also provide MTP/TRP functionality to a call.
Single choice
Which configuration step is necessary for a Cisco SIP phone to synchronize its time with a specific source? Reveal answer details Close answer detailsCorrect answerA Explanation Anything other than A is a situational preference, or just plain wrong. References:
Single choice
An engineer is configuring IP telephony. The network relies on DHCP to provide TFTP server addresses to the endpoints. Policy requires the endpoints to receive two server addresses. Which DHCP option must be configured? Reveal answer details Close answer detailsCorrect answerC Explanation Option 66 provides a single TFTP server address. Option 150 provides a list of TFTP server addresses.
Single choice
Which Cisco IOS XE gateway element is used to match incoming or outgoing VoIP call legs and apply call-routing behavior? Reveal answer details Close answer detailsCorrect answerB Explanation VoIP dial peer is correct because IOS XE dial plans use dial peers to match call legs and apply destination, session, codec, and other call treatment settings. Region, SIP route pattern, and date/time group are Cisco UCM constructs rather than IOS XE gateway dial-plan elements.
Multiple choice
An engineer configures Cisco Unified Communications Manager to prevent toll fraud. Reveal answer details Close answer detailsCorrect answersA, C
Single choice
Refer to the exhibit. ![]() What is the reason for this call failure? Reveal answer details Close answer detailsCorrect answerD
Multiple choice
An engineer is asked to implement on-net/off-net call classification in Cisco UCM. Which two components are required to implement this configuration? (Choose two) Reveal answer details Close answer detailsCorrect answersA, D
Single choice
An administrator must make a pattern to route calls to two different destinations: [email protected] and [email protected]. Which type of patterns are needed in the Cisco UCM, and what must the pattern look like? Reveal answer details Close answer detailsCorrect answerD Explanation https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-100_chapter_0100111.pdf
Single choice
Which call routing pattern is used for phone numbers that are in the E.164 format? Reveal answer details Close answer detailsCorrect answerA Explanation References:
Single choice
An administrator configures Cisco UCM to use UDP for SIP signaling and finds that an endpoint cannot make calls. Which action resolves this issue? Reveal answer details Close answer detailsCorrect answerD Explanation References:
Multiple choice
Which two features will access layer switches provide support providing high-quality voice and taking advantage of the full voice feature set? (Choose two.) Reveal answer details Close answer detailsCorrect answersC, E
Single choice
Which Cisco Collaboration Edge architecture product allows remote endpoints to leverage corporate on- premises Cisco Unified Communications infrastructure? Reveal answer details Close answer detailsCorrect answerC
Multiple choice
What are two characteristics of numbers in Webex Calling? (Choose two) Reveal answer details Close answer detailsCorrect answersA, B
Single choice
An engineer troubleshoots outbound can failure on an ISDN-PRI circuit. The engineer is suspecting the 'Incomplete Destination". Which debugs or commands are run in the voice gateway to troubleshoot the issue? Reveal answer details Close answer detailsCorrect answerC Explanation The engineer should run the following debugs or commands in the voice gateway to troubleshoot the issue: debug isdn q931 - This debug will show the ISDN Q.931 messages that are being exchanged between the voice gateway and the ISDN switch. This can be used to identify the cause of the "Incomplete Destination" error. show isdn status - This command will show the status of the ISDN PRI circuit. This can be used to verify that the circuit is up and running. The other options are not correct. The debug isdn q921 command will show the ISDN Q.921 messages that are being exchanged between the voice gateway and the ISDN switch. This is not necessary for troubleshooting the issue. The term mon command will show the terminal monitor output. This is not necessary for troubleshooting the issue. The debug voip ecapi inout command will show the VoIP ECAP messages that are being exchanged between the voice gateway and the VoIP server. This is not necessary for troubleshooting the issue. The show controller ti command will show the status of the T1 controller. This is not necessary for troubleshooting the issue.
Multiple choice
As a voice engineer, which two recommendations do you to make to your company to optimize Cisco Unified Communications Manager configuration to reduce the number of toll fraud incidents? (Choose two.) Reveal answer details Close answer detailsCorrect answersC, E
Single choice
Refer to the exhibit. ![]() IP phone A makes a call to IP phone B and RTP voice stream is successfully established between the endpoints. What option describes how to accomplish this call on phones with incompatible IP addressing versions? Reveal answer details Close answer detailsCorrect answerC
Single choice
Where in Cisco UCM are codec negotiations configured for endpoints? Reveal answer details Close answer detailsCorrect answerD
Single choice
What is the cisco UCM service parameter default value for DSCP for Telepresence calls? Reveal answer details Close answer detailsCorrect answerA
Multiple choice
An engineer configures a SIP trunk for MWI between a Cisco UCM cluster and Cisco Unity Connection. Which two SIP trunk settings resolve this issue? (Choose two.) Reveal answer details Close answer detailsCorrect answersB, E
Single choice
In a Cisco Unified Communications Manager design where +E.164 destinations are populated in directory entries, which call routing practice is critical to prevent unnecessary toll charges caused by internal calls routed through the PSTN? Reveal answer details Close answer detailsCorrect answerA
Multiple choice
Which two types of devices are included in the conditionally trusted endpoints category of Cisco UCM? (Choose two.): Reveal answer details Close answer detailsCorrect answersC, E
Single choice
What is an indicator of network congestion in VoIP communications? Reveal answer details Close answer detailsCorrect answerA
Single choice
A customer wants a video conference with five Cisco TelePresence IX5000 Series systems. Which media resource is necessary in the design to fully utilize the immersive functions? Reveal answer details Close answer detailsCorrect answerD
Single choice
What is the purpose of configuring outgoing call permissions in a Cisco Webex dial plan? Reveal answer details Close answer detailsCorrect answerB
Single choice
Which protocol does Cisco Prime Collaboration Assurance use to poll the health status of different systems in the Collaboration environment? Reveal answer details Close answer detailsCorrect answerB Explanation References:
Single choice
How does traffic policing respond to violations? Reveal answer details Close answer detailsCorrect answerC Explanation References:
Single choice
Which type of application traffic is classified under the DiffServ AF41 class according to the Cisco Collaboration System Solution Reference Network Design? Reveal answer details Close answer detailsCorrect answerC
Multiple choice
An engineer is designing a high availability and failover solution for two Cisco Unified Border Element routers. The first router (cube1.ab.com) takes 60% of the calls and the second router (cube2.abc.com) takes 40% of the calls. Assume all DNS A records have been created. Which two SRV records are needed for a load balanced solution? (Choose two.) Reveal answer details Close answer detailsCorrect answersC, E
Single choice
Where is the default Interregion Maximum Session Bit Rate for a region configured? Reveal answer details Close answer detailsCorrect answerA Explanation References:
Single choice
What is the major difference between the two possible Cisco IM and Presence high-availability modes? Reveal answer details Close answer detailsCorrect answerC Explanation Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.
Single choice
A company deploys centralized cisco ucm architecture for a hub location and two remote sites. 1. The company has only one ITSP connection at the hub connection, and ITSP supports only G.711 calls What is the method that needs to be followed? Reveal answer details Close answer detailsCorrect answerC Explanation Site B has a T1 connection and we don't want to force them to limit the number of calls. As an administrator, i would take the incoming calls from site B in G729 and do a transcode at the hub location, and receive an Incoming call to Site B in G 711 and transcode it to G729 and traverse over T1. Win Win situation.
Multiple choice
A Cisco collaboration engineer is troubleshooting unexpected SIP call disconnects. Which three responses correspond to the 5xx range (Chose three). Reveal answer details Close answer detailsCorrect answersA, D, F
Drag & drop
DRAG DROP An engineer must add a new user account and mailbox in Cisco Unity Connection. Drag and drop the configuration steps from the left into the correct order on the right. ![]() Reveal answer details Close answer details![]()
Single choice
An engineer implements QoS in the enterprise network. Which command can be used to verify the correct classification and marking on a Cisco IOS switch? Reveal answer details Close answer detailsCorrect answerB Explanation References:
Single choice
An engineer must configure DTMF relay on a Cisco Unified Border Element by using RFC2833 as the preferred relay mechanism and KPML as the next preferred relay mechanism. The engineer logs in to the CUBE and enters the dial-peer configuration level. Which command should be run at the dial-peer configuration level? Reveal answer details Close answer detailsCorrect answerD
Multiple choice
What are two characteristics of QoS traffic policing? (Choose two.) Reveal answer details Close answer detailsCorrect answersA, B
Multiple choice
What are two key features of the Expressway series? (Choose two.) Reveal answer details Close answer detailsCorrect answersB, D Explanation Registration directly to Expressway. This option is new in Expressway X8.9. Registering users and devices directly to Expressway (both SIP and H.323 registrations are supported with Expressway-C, and proxy SIP registration is supported with Expressway-E) enables you to extend video-centric services to users. and Feature is ofc b2b
Single choice
Which IP Precedence value is used to classify a call signalling packet? Reveal answer details Close answer detailsCorrect answerD Explanation The IP precedence is a 3-bit field in TOS that threats high priority packets as more important than other packets. In contrast, DSCP is 6 bits of the Differentiated Services Field (DS Field) in the IP header for packet classification purposes. Value Description 000 (0) Routine or Best Effort
Single choice
Which external DNS SRV record must be present for Mobile and Remote Access? Reveal answer details Close answer detailsCorrect answerB Explanation References:
Single choice
A Cisco TelePresence SX80 suddenly has issues displaying main video to a display over HDMI. Which command can you use from the SX80 admin CLI to check the video output status to the monitor? Reveal answer details Close answer detailsCorrect answerA Explanation https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/api-reference-guide/sx80-api-reference-guide-tc71.pdf
Single choice
Cisco Prime Collaboration Manager is using Cisco Discovery Protocol to discover devices in an automated setup. What must be used to get alerts and faults via traps from the devices at regular polling intervals? Reveal answer details Close answer detailsCorrect answerC
Single choice
Which certificate standard is explicitly identified in the exam topics for collaboration security troubleshooting? Reveal answer details Close answer detailsCorrect answerA Explanation x.509 is correct because the exam topics specifically call out x.509 certificates under collaboration security troubleshooting. The other terms refer to file formats or packaging methods rather than the named certificate standard in the blueprint.
Multiple choice
An engineer must help a customer's administrator to set QoS options for the cluster. What are two QoS settings on the Cisco UCM server? (Choose two.) Reveal answer details Close answer detailsCorrect answersA, E
Single choice
What is the purpose of a DNS CNAME record? Reveal answer details Close answer detailsCorrect answerB
Single choice
Refer to the exhibit. ![]() Unanswered calls do not reach the voicemail associated with the phones. Instead, callers receive the default greeting. Which action fixes the configuration? Reveal answer details Close answer detailsCorrect answerB
Multiple choice
Which two configurations are needed for Cisco UCM location-based CAC? (Choose two.) Reveal answer details Close answer detailsCorrect answersA, C
Single choice
Refer to the exhibit. ![]() In Cisco UCM, an engineer must create a new SIP route pattern that must be reachable by all Internal callers. The internal callers have a calling search space named CSS_INTERNAL that includes a partition named PT_INTERNAL. The SIP trunk has a calling search space named CSS_SIP_RP that includes the two partitions named PT_SIP_INTERNAL and PT_SIP_LOCAL. What must be used as the route partition for the SIP route pattern? Reveal answer details Close answer detailsCorrect answerD Explanation Routepattern or SIP Route pattern is something that is directing from CUCM to a different/outside destination - > Phone has to reach this pattern. Phone Trunk
Multiple choice
A customer wants to conduct B2B video calls with a partner using an on-premises conferencing solution. Which two devices are needed to facilitate this request? (Choose two.) Reveal answer details Close answer detailsCorrect answersA, E
Single choice
An engineer is setting up a system with voice and video endpoints using auto-QoS policy on the switches. Which DSCP values are expected for interactive voice and video? Reveal answer details Close answer detailsCorrect answerA
Multiple choice
Endpoint A is attempting to call endpoint B. Endpoint A only supports G.711ulaw with a packetization rate of 20 ms, and endpoint B supports packetization rate of 30 ms for G.711ulaw. Which two media resources are allocated to normalize packetization rates through transrating? (Choose two.) Reveal answer details Close answer detailsCorrect answersA, B Explanation While a transcoder could work, MTP is sufficient and the better answer. CUCM and IOS have MTP resources, but IOS can only handle transrating when using DSPs (which would be configured as a hardware MTP).
Single choice
Refer to the exhibit. ![]() An engineer must modify the existing QoS policy-map statement to implement LLQ for voice traffic. Which change must engineer make in the configuration? Reveal answer details Close answer detailsCorrect answerC
Multiple choice
Which two steps are required for bulk configuration transactions on the Cisco UCM database utilizing BAT? (Choose two.) Reveal answer details Close answer detailsCorrect answersD, E Explanation For bulk configuration transactions on the Cisco Unified Communications Manager database, the BAT process uses two components: a template for the device type and a data file in comma separated value (CSV) format that contains the unique values for configuring a new device or updating an existing record in the database. The CSV data file works in conjunction with the device template. References:
Single choice
Refer to the exhibit. ![]() Users at a company located in New York cannot place calls. The New York gateway is configured with a T1 ISDN PRI card with 24 channels. The engineer runs the show isdn status command and receives output. Which action must the engineer take to resolve the issue? Reveal answer details Close answer detailsCorrect answerC
Single choice
Which Cisco collaboration client is explicitly included in the endpoint deployment scope of the current 350- 801 exam blueprint? Reveal answer details Close answer detailsCorrect answerC Explanation Webex App is correct because the current blueprint explicitly includes Webex App for desktop and mobile under endpoint and soft-client deployment. Jabber is explicitly excluded in the blueprint note for that section, and the other clients are not the intended answer.
Single choice
Refer to the exhibit. ![]() A call is failing to establish between two SIP Devices The called device answers with this SOP. Which SDP parameter causes this issue? Reveal answer details Close answer detailsCorrect answerD Explanation The RTP port is used to send and receive media packets during a call. If the RTP port is set to 0, the called device will not be able to send or receive media packets, and the call will fail.
Single choice
Refer to the exhibit. ![]() An engineer is troubleshooting a codec negotiation issue where both endpoints that are involved in the call support the codecs listed in the exhibit. Which audio codec is selected il a call between two endpoints in Region 1 is placed? Reveal answer details Close answer detailsCorrect answerB Explanation In the picture from the drop-down list (Codecs in List*) it is indicated that the codec is 722 use 48k. |