Free 301A Exam Dumps Preview

A virtual server is configured to handle https traffic. The clientssl profile is configured to use a2048- bit RSA key. Due to security requirements, is the LTM Specialist needs to use a 4096-bit RSA key in the future.

What two effects will this change have on the BIG-IP device? (Choose two)

An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member 10.10.101:80 on an LTM device.

Which expression should the LTM Specialist use?

An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.

Which monitor type and parameters arc required?

In an iApp, which configuration protects against accidental changes to an application Services configuration?

An LTM is configure an application that is separated into several subdomains across multiple virtual servers. Many of these subdomains require encryption and could be accessed by anyone on the internet.
The configuration must NOT result in SSL warnings to end users.

How should the LTM Specialist configure the SSL profiles for these virtual servers?

An LTM Specialist creates an Analytics wide to show the type of browsers used to access a certain application. However, the generated statistics only sum up all transaction for that application under one item called "Aggregated.'

' What should the LTM Specialist do to resolve this problem?

An unwanted IP address tries to connect to the configuration utility via Self IP An LTM Specialist needs to block the attempts based on the IP address.

How should the ITM Specialist block the attempts without affecting other users?

An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP. Which two custom TCP monitors should be selected as the pool's health monitors' (Choose two)

An LTM Specialist regularly provides analytics reports that show that traffic generated by different subnets within the organization. The LTM Specialist needs show the associate department names next the IP addresses in the reports.

Which step should the LTM Specialist take to meet this requirement?

An LTM Specialist is configuring a virtual server with an IP address.

Which configuration is unsupported?

What should an LTM Specialist configure on an LTM device to send AVR notification emails?

An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.
which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)

set payload {CACHE :: payload}
}

Which two profiles should be used on the virtual server? (Choose two.)

An LTM Specialist needs to provide statistics regarding the round-trip time between the clients and the servers.

Which metric should be part of the analytics profile to provide that information?

An LTM Administrator receives an email from the NOC stating that the switch connected to the backend server was shut down for maintenance. The BIG-IP device handles only UDP traffic. The BIG IP device did not fail over to a DR location when no pool members were available. When the LTM Administrator checks the pool, it confirms that the monitor is still marking UP the pool member.
A tcpdump of the traffic shows the following output:

A list of the monitor configuration shows the following:

Which two modifications to the LTM configuration will mark this pool member down, when the switch is down? (Choose two.)

An LTM device needs to be configured a virtual server. The application requires SSL encryption from the client to the server and an X-Forwarded-For added by the LTM device.

Which virtual server type should the LTM Specialist use?

An LTM Specialist needs to load balance an application using an LTM device to meet the requirements:

1. The application servers do NOT Support SSL, but client access to the application should be secured.
2. Multiple requests from the same client should be sent to the same pool member.
3. All pool members will have roughly the same processing power, and traffic should be distributed evenly.

The LTM device is NOT the pool members' default gateway. Which configuration should the LTM Specialist.

A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept DNS over TCP. The configuration of the virtual server is as follows:

Which action should be taken to correct this issue?

Refer to the exhibit.

The http monitor is applied to a pool All members are enabled One pool member stops responding TCP port 80. The server still responds to ping.

What is the resulting status of this pool member?

Exhibit.

The LTM devices LTM1 and LTM2 are configured in a Device Group (Sync Failover) with Network Failover configured on both the management and HA and Internal VLANS. and ConfigSync is confined in a Device Group (Sync Failover) with Network Failover and internal are tagged on a single trunk with subnets Connection Mirroring is configured on both the HA interlace directly connected between LTM1 and LTM2, and the management interlace is connected to a management switch. The LTM devices have four Traffic Groups defined, and both LTM devices are healthy and capable of passing traffic for any of the Traffic Groups.
An LTM Specialist disconnects the cable for the HA network in an effort to test failover.

Which HA functionality works in this case?

An LTM device an application that requires all connections to be secured via SSL The device must verify that request contain a specific cookie before allowing the request to be sent to the pool member.

Which virtual server type should an LTM Specialist configure on the LTM device?

To improve application security, an LTM Specialist must configure a BIG application access. The BIG IP system to authenticate the client certificate before permitting application access. The BIG-IP system must also support the ability to red to redirect users to a certificate enrolment system without generating a browser error.
Within the Client SSL profile, which value should the LTM Specialist select for the Client Certificate option?

Refer to the exhibit.

The http monitor is applied to a pool. All members are enabled. One server responds as follows.

What is the resulting status of this poo!
member?