Free 300-440 Exam Dumps Preview

The process of configuring a Cisco SD-WAN Cloud Interconnect with Equinix involves several steps.
Ensure that you have UUIDs for the required number of Cisco SD WAN Virtual Edge instances that you want to deploy as Interconnect Gateways: This is the first step where you ensure that you have the necessary UUIDs for the Cisco SD-WAN Virtual Edge instances that you want to deploy.
Create the necessary network segments: After ensuring the availability of UUIDs, you create the necessary network segments.
Attach Cisco SD-WAN Virtual Edge to the Equinix device template: After setting up the network segments, you attach the Cisco SD-WAN Virtual Edge to the Equinix device template.
Create the Interconnect Gateway at the Equinix location that is closest to your SD-WAN branch location: Finally, you create the Interconnect Gateway at the Equinix location that is closest to your SD-WAN branch location.
References:
[Cisco SD-WAN Cloud Interconnect with Equinix]
[Cisco SD-WAN Cloud OnRamp for CoLocation Deployment Guide]

Step 1 = Click Configuration, select Templates, and then select Feature Templates.
Step 2 = Click Add Template, select the device, and then click Basic Configuration.
Step 3 = Shut down the tunnel and then remove the ISAKMP profile.
Step 4 = Attach the IKEv2 profile and then run the no shutdown command on the tunnel.

The process of configuring a site-to-site IPsec VPN connection between an on-premises Cisco IOS XE router in Controller mode and AWS, and changing the IKE version from IKEv1 to IKEv2 in Cisco vManage involves several steps 123. Click Configuration, select Templates, and then select Feature Templates: This is the first step where you navigate to the Templates section in the Configuration menu of Cisco vManage1.
Click Add Template, select the device, and then click Basic Configuration: In this step, you add a new template for the device and proceed with the basic configuration.
Shut down the tunnel and then remove the ISAKMP profile: Before changing the IKE version, you need to shut down the existing tunnel and remove the ISAKMP profile that is configured for IKEv12.
Attach the IKEv2 profile and then run the no shutdown command on the tunnel: Finally, you attach the newly created IKEv2 profile to the tunnel and bring the tunnel back up.

References:
Configuring Internet Key Exchange Version 2 (IKEv2) - Cisco Switch from IKEv1 to IKEv2 on Cisco Routers - Cisco Community Configure IOS-XE Site-to-Site VPN Connection to Amazon Web Services -
Cisco Community

References:
Learning Plan: Designing and Implementing Cloud Connectivity v1.0 (ENCC 300-440) Exam Prep Designing and Implementing Cloud Connectivity (ENCC) v1.0
Cisco Multiprotocol Label Switching
Exploring Cisco Cloud OnRamp for Colocation ENCC: Configuring IPsec VPN from Cisco IOS XE to AWS : [Deploying Cisco IOS VTI-Based Point-to-
Point IPsec VPNs]

To redistribute OSPF internal routes into BGP, the engineer needs to configure two commands on router
R2. The first command is router bgp 100, which enables BGP routing process and specifies the autonomous system number of 100. The second command is redistribute ospf 1 match internal external, which redistributes the routes from OSPF process into BGP, and matches both internal and external OSPF routes. This way, the engineer can avoid introducing extra routes that are not part of OSPF process 1, such as the default route or the connected routes.

References:
Designing and Implementing Cloud Connectivity (ENCC) v1.0, [ENCC: Configuring IPsec VPN from Cisco IOS XE to AWS], [Deploying Cisco IOS VTI-Based Point-to-Point IPsec VPNs]

Step 1 = Click Configuration, select Templates, and then select Feature Templates.
Step 2 = Click Add Template, select the device, and then click Select Template.

Step 3 = Click CLI Add-On Template and enter the name and description.
Step 4 = Paste the CLI configuration and then click Save.

The process of configuring a CLI add-on feature template in Cisco vManage for enhanced policy-based routing (ePBR) for IPv4 involves several steps1234. Click Configuration, select Templates, and then select Feature Templates: This is the first step where you navigate to the Templates section in the Configuration menu of Cisco vManage.
Click Add Template, select the device, and then click Select Template: In this step, you add a new template for the device.
Click CLI Add-On Template and enter the name and description: After setting up the template, you select the CLI Add-On Template option, and then enter the name and description for the template.
Paste the CLI configuration and then click Save: Finally, you paste the CLI configuration into the template and save the changes.

References:
CLI Add-On Feature Templates - Cisco Cisco Catalyst SD-WAN Systems and Interfaces Configuration Guide, Cisco IOS XE Catalyst SD-WAN Release 17.x - CLI Add-On Feature Templates Cisco SD-WAN vSmart CLI Template -
NetworkLessons.com CLI Templates for Cisco XE SD-WAN Routers

A centralized internet gateway is a network design that routes all internet-bound traffic from the on-premises infrastructure through a single point of egress, typically located at the data center or a regional hub 1. This approach allows the enterprise to apply consistent security policies and access controls for SaaS applications, as well as optimize the bandwidth utilization and performance of the WAN links.
A centralized internet gateway can use various technologies to provide connectivity to SaaS applications, such as proxy servers, firewalls, web filters, and WAN optimizers. However, a cloud-based proxy server (option A) is not a part of the centralized internet gateway, but rather a separate service that can be used to route traffic from the on-premises infrastructure to the SaaS provider data center 4. VPN connections (option C) and dedicated, private connections (option D) are also not related to the centralized internet gateway, but rather alternative ways of providing secure and reliable access to SaaS applications from the on-premises infrastructure 5. Therefore, the correct answer is option B, which describes the basic function of a centralized internet gateway.