Free 2V0-33.22 Exam Dumps Preview

https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/administration/GUID-BF536EEF-7AC3-47D0-B4E6-E24B591530AA.html
According to the VMware Exam Guide for Cloud Professional Exam (
https://mylearn.vmware.com/mgrreg/
courses.cfm?ui=www_edu&a=one&id_subject=45954 ),"To create a new network segment that utilizes the corporate DHCP server to provide IP addresses, the following sequence should be used: Create a DHCP server profile, create a new segment attached to the Tler-0 gateway, and configure the segment DHCP config to utilize the new DHCP server profile."

Hybrid Linked Mode can tolerate a time skew of up to ten minutes between the on-premises data center and the cloud SDDC. The maximum latency between your cloud SDDC and on-premises data center
cannot exceed 100 msec roundtrip.

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-BE75F0F1-2864-4926-97FE-37E635471C43.html

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-
1A175E91-2317-4261-A63E-B398D92ECE8D.htmlvMotion Requirements for SDDCs With NSX:Networking speed and latency: Migration with vMotion requires sustained minimum bandwidth of 250
Mbps between source and destination vMotion vMkernel interfaces, and a maximum latency of 100 ms round trip between source and destination.
On-premises vSphere version: Your on-premises vSphere installation must be vSphere 6.7U2 or higher.
See VMware Knowledge Base article 56991 for more information.
On-premises DVS version: 6.0 or higher.
On-premises NSX version: any Note: SDDCs configured with NSX do not support hot vMotion to or from on-premises VXLAN encapsulated networks (NSX for vSphere) or Geneve Datacenter Overlay networks (NSX).
IPsec VPN: Configure an IPsec VPN for the management gateway. See Configure a VPN Connection Between Your SDDC and On-Premises Data Center in the VMware Cloud on AWS Networking and Security guide. Direct Connect: Direct Connect over a private virtual interface between your on-premise data center and your VMware Cloud on AWS SDDC is required for migration with vMotion. See Using AWS Direct Connect with VMware Cloud on AWS. Hybrid Linked Mode: Hybrid Linked Mode is required to initiate migration from the vSphere Client. It is not required to initiate migration using the API or PowerCLI.
See "Hybrid Linked Mode" in Managing the VMware Cloud on AWS Data Center. L2 VPN: Configure a Layer 2 VPN to extend virtual machine networks between your on-premises data center and cloud SDDC.
Routed networks are not supported. See VMware Cloud on AWS Networking and Security. VMware Cloud on AWS firewall rules Ensure that you have created the necessary firewall rules as described in Required Firewall Rules for vMotion.
On-premises firewall rules: Ensure that you have created the necessary firewall rules as described in Required Firewall Rules for vMotion.
Virtual machine hardware and settings: Ensure that these requirements are met for virtual machine hardware.

Virtual machine hardware version 9 or later is required for migration with vMotion from the on-premises data center to the cloud SDDC. EVC is not supported in the VMware Cloud on AWS SDDC. VMs that are created in the cloud SDDC or that have been power-cycled after migration to the cloud SDDC can't be migrated back to the on-premises data centerwith vMotion unless the on-premises EVC baseline is Broadwell. You can relocate these VMs after powering them off, as long as their virtual machine hardware version is compatible with the on-premises data center. Migration of VMs with DRS or HA VM overrides is not supported. For more information on VM overrides, see Customize an Individual Virtual Machine.

Important: Source switch configurations (including NIOC, spoofguard, distributed firewall, and Switch Security) and runtime state are not applied at the destination as part of migration in either direction. Before you initiate vMotion, apply the source switch configuration to the destination network.

In order for a virtual machine to be migrated using VMware vSphere vMotion, the versions of VMware vSphere need to match between the on-premises data center and the cloud SDDC, and a Layer 2 connection needs to be configured between them. Additionally, cluster-level Enhanced vMotion Compatibility (EVC) must be configured in both the on-premises data center and the cloud SDDC. IPsec VPN and AWS Direct Connect do not need to be configured for the migration to occur.

A key driver behind the multi-cloud journey is digital transformation, which is the process of using technology to optimize existing processes and systems in order to improve customer experiences, increase operational efficiency, and accelerate business growth. Multi-cloud solutions can help organizations modernize their applications and services, reduce costs, increase agility, and support digital transformation initiatives. For more information, please refer to the official VMware Cloud on AWS documentation at:
https://docs.vmware.com/en/VMware-Cloud-on-AWS/index.html.

The two steps that the cloud administrator should complete on I/O-intensive workloads to ensure the best performance possible are to configure the VMware Paravirtual SCSI (PVSCSI) adapter and to ensure that the VMware hardware version is 7 or later. The PVSCSI adapter provides improved performance and scalability compared to the LSI Logic Parallel SCSI controller. Additionally, the hardware version should be 7 or later to ensure that the virtual machine is able to take advantage of the latest features and enhancements. Enabling the memory hot-add feature and configuring a maximum of two CPU cores per socket will not improve the performance of I/O-intensive workloads.

Why does VMware refuse to educate their customers ... - VMware ...
https://communities.vmware.com/t5/VMware-Education-Services/Why-does-VMware-refuse-to-educate-their-customers/td-p/2005973

VMware Technical Support Guide
https://www.vmware.com/pdf/techsupportguide.pdf

Publishing Applications with VMware Horizon 7
https://vcdx.vmware.com/content/dam/digitalmarketing/vmware/ru/pdf/techpaper/vmware-horizon-7-application-publishing.pdf

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/vmc-aws-performance.pdf

https://cloud.google.com/vmware-engine/docs/concepts-vmware-componentsNode
Considerations

You can specify the number of hosts to add or remove to or from their cluster. Private cloud initial setup happens in ~30 minutes.
Additional hosts can be added in ~15 minutes.
A three-node cluster is the minimum for production.
You can have up to 32 hosts per cluster.
You can have up to 64 hosts per private cloud.

References:
https://cloud.google.com/vmware-engine/docs/concepts-vmware-components

One benefit of public cloud computing is cost savings on capital hardware expenses. Since the cloud provider owns and manages the hardware, the customer does not need to invest in the purchase and maintenance of physical hardware, resulting in significant cost savings. Additionally, public cloud services often provide scalability and can be accessed from anywhere with an internet connection.

VMware Multi-Cloud Vision enables customers to deliver a consistent management and operations layer across any cloud, and to modernize applications in the cloud of choice using the cloud-native services of that cloud provider. It does not run workloads in the cloud to eliminate security issues, standardize at the DevSecOps and infrastructure level, or reduce the number of developers to increase productivity.

https://docs.vmware.com/en/VMware-Workspace-ONE-Access/20.10/workspace_one_access_install/
GUID-E81B6B1B-A3D1-40D0-806A-3D31502C53A5.html

The Cloud Services Portal communicates with the Workspace ONE Access Connector via port 443 (HTTPS). According to the VMware documentation [1], the Cloud Services Portal connects to the Access Connector on port 443 to authenticate users and authorize access to the cloud service. The Access Connector listens on port 443 and communicates with the Active Directory using LDAP over TLS (LDAPS) on port 636.
References:
https://docs.vmware.com/en/VMware-Workspace-ONE-Access/services/com.vmware.access.admin.configure.doc/GUID-F5C6FD9E-36DA-4B1F-A7E7-CF8F64A81D78.html

Incident Management is responsible for handling customer incidents and ensuring customer satisfaction.
Capacity Management is responsible for ensuring that the service is sized appropriately for customer needs and that the capacity is monitored to ensure that it meets customer requirements. VMware Tools management, Microsoft licensing management, and workload OS management are not part of the service management process.

What is a Hypervisor? | VMware Glossary
https://www.vmware.com/topics/glossary/content/hypervisor.html

VMware Cloud on AWS Operations Guide
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/vmc-aws-operations.pdf

What is a Bare Metal Hypervisor?| VMware Glossary
https://www.vmware.com/topics/glossary/content/bare-metal-hypervisor.html

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/
GUID-2D31A9A6-4A80-4B5B-A382-2C5B591F6AEB.html

https://docs.vmware.com/en/VMware-Cloud-Disaster-Recovery/services/vmware-cloud-dr-security-best-practices/GUID-BCC03463-437B-4DBE-BE21-0D43D5BA5776.html

A cloud administrator requires an external secure connection into their data center to use Border Gateway Protocol (BGP). The best connection type to use for this purpose is a Route-based virtual private network (VPN). This type of VPN is secure, as it uses encryption and authentication to protect the data transmitted over the connection. Additionally, it allows for the configuration of BGP to ensure that the data traffic is routed to the desired destination.

PREPARING FOR VMWARE CLOUD ON AWS
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/vmc-aws/preparing-for-vmware-cloud-on-aws.pdf

Publishing Applications with VMware Horizon 7
https://vcdx.vmware.com/content/dam/digitalmarketing/vmware/ru/pdf/techpaper/vmware-horizon-7-application-publishing.pdf

What is Network Virtualization? | VMware Glossary
https://www.vmware.com/topics/glossary/content/network-virtualization.html

Managing Costs:
With its capacity and cost management features, vRealize Operations Cloud can predict future demand and provide actionable recommendations to help in managing costs.
Reclamation of Existing Resources: Assess workload status and resource contention in data centers across your environment: Determine the time remaining until CPU, memory, or storage resources run out. Realize cost savings when underutilized VMs are identified and reclaimed to be deployed more effectively.
Future Infrastructure Requirements Run what-if scenarios: Identify how much capacity remains after you add or remove VMs or hosts.
Add hyperconverged infrastructure (HCI) nodes.
Get a recommendation based on the cost relative to workload placement on different hosts, clusters, data centers, and even different clouds.
Cloud Migration Planning:
Migration planning shows you the capacity and cost information after the migration to a cloud-based infrastructure.
Cost Overview vRealize Operations Cloud supports costing for private clouds, public clouds, and VMware Cloud infrastructure.
You can track expenses for a single virtual machine, and identify how these expenses attribute to the overall cost associated with your private cloud accounts and VMware Cloud infrastructure accounts.

On the Cost Overview home page in vRealize Operations Cloud, you can find details about the costs associated with your VMware Cloud infrastructure accounts, public cloud accounts, and your private cloud accounts.

You can view the Total Cost of Ownership, Potential Savings, and Realized Savings for your VMware

Cloud infrastructure cloud accounts and vSphere private cloud accounts, and Total Cost of Ownership for
your private cloud accounts.
References:
https://docs.vmware.com/en/vRealize-Business/7.6/vRBforCloud.user.doc/GUID-AA3C209A-2DFA-433F-BD57-67E66A598E5D.html

VMware vSAN is a distributed storage platform that is integrated into the VMware Cloud software-defined data center (SDDC). It provides policy-based storage management, allowing cloud administrators to define storage policies that can be applied to virtual machines and other workloads. These policies govern how data is stored, replicated, and secured, and are used to ensure that data is stored in a consistent and compliant manner.

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-EDBB551B-51B0-421B-9C44-6ECB66ED660B.html

The two use cases that apply to NSX logical routing are
A. You must provide external connectivity to VMs and containers, and
B. Your organization must provide connectivity between VMs and containers that are connected to different segments. NSX logical routing allows you to provide external connectivity to VMs and containers, and to provide layer 3 connectivity between VMs and containers that are connected to different segments. It does not provide layer 2 connectivity between VMs and microservices or intrinsic security for VMs connected to different segments.

VMware Cloud on AWS provides the highest level of performance, reliability, and scalability for customers who need to move large amounts of data between their SDDCs in the cloud. It is also the only hyperscaler partner that has the ability to quickly and easily provision entire SDDCs in the cloud. In addition, VMware Cloud on AWS offers the most comprehensive enterprise-grade features, such as automated backups and disaster recovery, which provide customers with peace of mind that their data is always secure and protected.

Port mirroring is a VMware Cloud tool that an administrator can use to forward all the monitored traffic to a network appliance for analysis and remediation. The network appliance can then analyze the mirrored traffic and take the appropriate remedial action. Port mirroring can also be used to identify and troubleshoot network issues, as well as monitor network activities.
Port mirroring lets you replicate and redirect all of the traffic coming from a source. The mirrored traffic is sent encapsulated within a Generic Routing Encapsulation (GRE) tunnel to a collector so that all of the original packet information is preserved while traversing the network to a remote destination.
Port mirroring is used in the following scenarios: Troubleshooting - Analyze the traffic to detect intrusion and debug and diagnose errors on a network.
Compliance and monitoring - Forward all of the monitored traffic to a network appliance for analysis and remediation.
Port mirroring includes a source group where the data is monitored and a destination group where the collected data is copied to. The source group membership criteria require VMs to be grouped based on the workload such as web group or application group. The destination group membership criteria require VMs to be grouped based on IP addresses. Port mirroring has one enforcement point, where you can apply policy rules to your SDDC environment.
The traffic direction for port mirroring is Ingress, Egress, or Bi Directional traffic: Ingress is the outbound network traffic from the VM to the logical network. Egress is the inbound network traffic from the logical network to the VM. Bi Directional is the traffic from the VM to the logical network and from the logical network to the VM. This is the default option.
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/
GUID-3268A0D3-89D0-406F-B44F-156DD1A30E00.html

Identify the desired region. This determines where your private cloud will be deployed and which Azure services are available.
Identify a management CIDR of size /22. This determines the IP address range for your private cloud management components such as vCenter Server, NSX Manager, etc.
Open a support request with Microsoft Azure requesting capacity. This ensures that there are enough hosts available for your private cloud deployment. Identify the current number of hosts needed. This determines how many hosts will be provisioned initially for your private cloud cluster.
https://vmc.techzone.vmware.com/resource/avs-planning-and-deployment-guide