Free 201 Exam Dumps Preview

Refer of the exhibit.

The 816-IP Administrator runs the command shown and observes a device trust issue between BIG-IP devices in a device group. The issue prevents config sync on device bigip3.local.

What is preventing the config sync?

A BIG-IP Administrator needs to apply a health monitor for a pool of database servers named DB_Pool that uses TCP port 1521.

Where should the BIG-IP Administrator apply this monitor?

A BIG-IP Administrator assigns the default http health monitor to a pool that has three members listening on port 80 When the administrator connects to each pool member via the CURL utility, two of the members respond with a status of 404 Not Found while the third responds with 200 OK.

What will the pool show for member availability?

Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?

Which Virtual Server type prevents the use of a default pool?

You have a pool of servers that need to be tested. All of the servers but one should be tested every 10 seconds, but one is slower and should only be tested every 20 seconds.

How do you proceed?

A BIG-IP Administrator is creating a new Trunk on the BIG-IP device.

What objects should be added to the new Trunk being created?

A 816-IP Administrator recently deployed an application Users are experiencing slow performance with the application on some remote networks.

Which two modifications can the BIG-IP Administrator make to address this issue? (Choose two)

A BIG-IP Administrator needs to find which modules have been licensed for use on the BIG-IP system.
In which section of the Configuration Utility can the BIG-IP Administrator find this information?

The 8IG-IP Administrator generates a qkview using "qkview -SO" and needs to transfer the output file via
SCP.

Which directory contains the output file?

The BIG-IP Administrator generates QKView using tmsh command "qkview -SO".
In which directory does the BIG-IP appliance save the QKView?

Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults.
If the origin server were to initiate traffic via the BIG-IP, what changes, if any, would take place when the BIG-IP processes such packets?

The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. The pool is marked available.
If a pool is marked available (green) which situation is sufficient to cause this?

All pool members are online. All other virtual server settings are at default.

What might after the load balancing behavior?

A BIG-IP Administrator needs to install a HotFix on a standalone BIG-IP device, which has HD1.1 as the Active Boot Location. The BIG-IP Administrator has already re-activated the license and created an UCS archive of the configuration.
In which sequence should the BIG-IP Administrator perform the remaining steps?

Which type of Virtual Server requires the use of a FastL4 profile?

Which must be sent to the license server to generate a new license?

What is the purpose of floating self-IP addresses?

During a high-demand traffic event, the BIG-IP Administrator needs to limit the number of new connections per second allowed to a Virtual Server.

What should the administrator apply to accomplish this task?

A user wants to use the iHealth Upgrade Advisor to determine any issues with upgrading TMOS from 13.0 to 13.1.

Where can the user generate the QKView to upload to iHealth?

What is required for a virtual server to support clients whose traffic arrives on the internal VLAN and pool members whose traffic arrives on the external VLAN?

Generally speaking, should the monitor templates be used as production monitors or should they be customized prior to use.

Refer to the exhibit.

An organization is reporting slow performance accessing their Intranet website, hosted in a public cloud.
All employees use a single Proxy Server with the public IP of 104.219.110.168 to connect to the Internet.

What should the BIG-IP Administrator of the Intranet website do to fix this issue?

A site has assigned the ICMP monitor to all nodes and a custom monitor, based on the HTTP template, to a pool of web servers. The HTTP based monitor is working in all cases.
The ICMP monitor is failing for 2 of the pool member 5 nodes. All other settings are default.

What is the status of the monitor is working in all cases?

A 8IG-IP Administrator configures a Virtual Server to load balance traffic between 50 webservers for an ecommerce website Traffic is being load balanced using the Least Connections (node) method.
The webserver administrators report that customers are losing the contents from their shopping carts and are unable to complete their orders.

What should the BIG-IP Administrator do to resolve the issue?

A site wishes to perform source address translation on packets from some clients but not others. The determination is not based on the client's IP address, but on the virtual servers their packets arrive on.

What could best accomplish this goal?

A BIG-IP Administrator is performing maintenance on the active BIG-IP device of an HA pair. The BIG-IP
Administrator needs to minimize traffic disruptions.

What should the BIG-IP Administrator do to start the maintenance activity?

The BIG-IP Administrator needs to perform a BIG-IP device upgrade to the latest version of TMOS.

Where can the administrator obtain F5 documentation on upgrade requirements?

A Standard Virtual Server for a web application is configured with Automap for the Source Address Translation option. The original source address of the client must be known by the backend servers.

What should the BIG-IP Administrator configure to meet this requirement?

A virtual server is listening at 10.10.1.100:80 and has the following iRule associated with it:

when HTTP_REQUEST { if { [HTTP::header UserAgent] contains "MSIE" }

{ pool MSIE_pool }

else { pool Mozilla_pool } If a user connects to http://10.10.1.100/foo.html and their browser does not specify a UserAgent, which pool will receive the request?

An LTM device has a virtual server mapped to www.f5.com with a pool assigned. Users report that when browsing, they are periodically required to re-login to /resources/201.1.7.b.2_l.com. The objects are defined as follows:

Virtual server. Destination 192.168.245.100:443 netmask 255.255.255.0

Persistence: SSL session persistence

Profiles: HTTP/TCP

Which persistence method should the BIG-IP Administrator apply to resolve this issue?

Which statement is true concerning SSL termination?

A BIG-IP Administrator needs to collect HTTP status code and HTTP method for traffic flowing through a virtual server.

Which default profile provides this information?

A BIG-IP Administrator configures remote authentication and needs to make sure that users can still login even when the remote authentication server is unavailable.

Which action should the BIG-IP Administrators in the remote authentication configuration to meet this requirement?

Refer to the exhibit

The network team creates a new VLAN on the switches. The BIG-IP Administrator needs to create a configuration on the BIG-IP device. The BIG-IP Administrator creates a new VLAN and Self IP, but the servers on the new VLAN are NOT reachable from the BIG-IP device.

Which action should the BIG-IP Administrators to resolve this issue?

A BIG-IP has two load balancing virtual servers at 150.150.10.10:80 and 150.150.10.10:443. The port 80 virtual server has SNAT automap configured. There is also a SNAT configured at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states.
If a client with the IP address 200.200.1.1 sends a request to https://150.150.10.10, what is the source IP address when the associated packet is sent to the pool member?

A set of servers is used for an FTP application as well as an HTTP website via separate BIG-IP Pools. The server support team reports that some servers are receiving a lot more traffic than others.

Which Load Balancing Method should the BIG-IP Administrator apply to even out the connection count?

Refer to the exhibit.

Due to a change in application requirements, a BIG-IP Administrator needs to modify the configuration of a Virtual Server to include a Fallback Persistence Profile.

Which persistence profile type should the BIG-IP Administrator use for this purpose?

Refer to the exhibit.

During maintenance, the BIG-IP Administrator manually disables a pool member as shown.

What is the result?